the detail that the probe will pick up.
the detail that the probe will pick up.
I did a scan of a project that I had carved, it had a finish on it but the probe even picked up the wood grain. It is very sensitive...have fun.
CJ
see pics too.
I had that same problem, and just got frustrated and turned the machine off for a few min, and it worked after a brief break.. odd
now the problem I am having is that the scan never starts at the point I jog to as the starting corner, it will go about 1/3 into the object and start there.
example: my object is flat and measures 5 inches wide by 20 inches long.
I jog to the correct corners, it gives me the correct dimensions, but when it starts the scan, it stars about 1/3 into the 20 inches.. weird
Ok, here's the final. What do you think.
Andrea
Very nice Andrea. Welcome to the wide world of scanning.
My only problem is having so many things I want to scan I'm cheating myself out of carve time. Again well done there.
Fair winds,
Capt Bruce
Kinney deSigns http://kinneydesigns.us
CarveWright START U Team Member.
30 year USN SEABEE, the original Weapons of Mass Construction.
Designer Ver 1.187 and 2.007, Ver.3.001 One 2009 B CW w ROCK and a 5th Year Anniversary C CW
Rotary Jig, 2D and 3D, Tracing Probe, DFX and STL Importers
.