Will not scan

[TIMCOSBY]

the detail that the probe will pick up.

[CarverJerry]

I did a scan of a project that I had carved, it had a finish on it but the probe even picked up the wood grain. It is very sensitive...have fun.

CJ

[TIMCOSBY]

see pics too.

[Walker Sky Ranch]

I had that same problem, and just got frustrated and turned the machine off for a few min, and it worked after a brief break.. odd

now the problem I am having is that the scan never starts at the point I jog to as the starting corner, it will go about 1/3 into the object and start there.

example: my object is flat and measures 5 inches wide by 20 inches long.
I jog to the correct corners, it gives me the correct dimensions, but when it starts the scan, it stars about 1/3 into the 20 inches.. weird

[andes]

Sorry forgot you asked for pic's. Well I finally scanned the item to get my template. The design I used is one of the stained glass shared designs from the forum. I still need to put the holes in and sand/finish to apply.

see pics too.

[andes]

Ok, here's the final. What do you think.

[Capt Bruce]

Very nice Andrea. Welcome to the wide world of scanning.

My only problem is having so many things I want to scan I'm cheating myself out of carve time. Again well done there.