Results 1 to 5 of 5

Thread: Freezes at Stay Under Roller Prompt

  1. #1
    Join Date
    Dec 2007
    Location
    Illinois
    Posts
    17

    Default Freezes at Stay Under Roller Prompt

    I was told problem was with Memory card. I replaced memory card and when I begin project I am only able to get to the stay under roller prompt 1 or 2. When I hit the keypad for either 1 or 2 nothing happens. I tried hitting arrows and the screen appears frozen. I tried another project and the same problem occurs.
    Any suggestions?

  2. #2

    Default

    Hi, have you tried format the card and up date firmware on the card?

  3. #3
    Join Date
    Dec 2007
    Location
    Illinois
    Posts
    17

    Default

    Thanks for everyones help. I found a slight tear in the keypad cable that probably is the cause of the frozen keypad. Will replace

  4. #4
    Join Date
    Nov 2007
    Location
    Aurora, Illinois
    Posts
    803

    Default post lube

    Dry lube all 4 posts go up and down a few tines and blow out the clutch handle relube 4 posts. That works for me all the time Hope it helps!
    Lee
    Pop's Fix It Shop, We won't make it any worse.. Using "A" machines 1.187 1.188 ,2.007, 3.103
    2 Machines no waiting.

  5. #5
    Join Date
    Nov 2007
    Location
    Aurora, Illinois
    Posts
    803

    Default

    sorry wrong place
    Lee
    Pop's Fix It Shop, We won't make it any worse.. Using "A" machines 1.187 1.188 ,2.007, 3.103
    2 Machines no waiting.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •