Originally Posted by
Kix
I would cut the Corian to size first 16.375 x 4 inches then make a sled to fit the Corian board.
I was originally thinking of doing longer strips like 60" or however long the sheets come by 4". That way I can hopefully get longer production runs without having to stop, reload, and whatnot too much.
I think I am going to be using 1/2" Corian, so I dont need a sled, right?
Again, it is much appreciated!
The CW will run 1/2 inch stuff with out the sled. I haven't carved Corian, it is slick and hard and heavy. Five foot stuff would need out feed rollers. If the board slips on the brass roller it will mess up the timing. Let us know how it works out. I am happy to help you. BJB
Don't forget to add the Chop Saw blade thickness or your peaces will not be square.
I think the sheets are sold in 4’ x 8’ and 4’ x 12’, but you can glue them together – fix the seams and make a one peace size any shape you want.
Last edited by bjbethke; 03-31-2010 at 08:08 AM.
Using Designer Version 1.187
Donations are always welcomed, thanks – send a check to my PO Box 652
BJB
PO Box 652
Yellville,AR 72687-0652
PM me for my e-mail address.