Help me make up my mind

[OneTimeWoodcraft]

I am undecided about buying this machine since visiting the compucarve website and reading the reviews. I know that a lot of the problems experienced by those carvers were cause by sears. Others appeared to be doing something that the machine was not designed to do, and others seemed to have problems just making the machine work. But in all cases, the bad reviews were complete nightmares, and the good reviews said the machine was perfect. How can i make up my mind....HELP

[CarverJerry]

It took me almost a year to make up my mind. I love it, the only things I'd do different is buy a CC and only because of the warrenty and buy the rock before I made my first carving, and the vacuum is a MUST. I love my CW.

CJ

[spalted]

I just got my machine recently. I had been thinking about it for well over a year.

I had a few minor problems with mine out of the box so far, a loose belt and I had to adjust the head pressure.

My Quick Chuck is a good one, but I still plan to by a Rock Chuck. I'm convinced it will be money well spent. Ron had had been very helpful, answered all my question, given me good honest information. I believe he has a good product and is a class act.

I personally would not run my machine without dust collection.

I think the thing to remember is the Carvewright is not like grandpa's old table saw. It's not a bullet proof tank of a machine that can handle anything you can shove into it. It requires maintenance and a little more fussing to keep it running good.

So far I think its a good product. support has been great and everyone here at the forums have been really helpful.

[Digitalwoodshop]

The problem with SEARS was that there return policy is and was too lax....

Far too many machines were just traded in when the user didn't know how to repair the basic failures. Hundreds of machines were turned in... Some still return machines and brag about it.... Not everyone is mechanically inclined to do the basic repairs or just don't want to learn.

Much of the "Noise" on the feedback was from users just frustrated that the machine beat them... Yes, there are "Known" problems with the production units. Once the problems are fixed then you have a reliable machine... Just look at the problems in the Troubleshooting section.... SAME Problems OVER and OVER.... So reading 6 months of the forum and having a good attitude about getting all the production unit problems fixed either by warranty or paying for them... Getting a ROCK is a requirement.

So I say.... Get the machine and get the Warranty if you can find it.

It's 95% Attitude.... Keep it positive and you will be FINE....

Yes, some will not like my post but it is a bit of TUFF LOVE....

LHR charges $25.00 for out of warranty Tech Assist.... I am FREE and a PM,email, or phone call away......

Sometimes I can offer advice to fix your problem.

AL

[bowfingers]

I have had my Carvewright for two years now and I looked and debated about buying one for about a year. I have not regretted purchasing it. In my opinion the people who have the best luck with the machine are the types that are not easily frustrated and have at least a little mechanical aptitude. So if you’re the type who isn’t easily disgusted when things do not go quite right and like making great looking projects then this might be the right for you. Take a look on this site and you will find that there are a lot of very helpful people on here who can help you if you get stuck with something.
Good luck making your decision
Denny

[Griz64]

LHR charges $25.00 for out of warranty Tech Assist.... I am FREE and a PM,email, or phone call away......

Hey DWS I am curious if this goes for everyone?

[OneTimeWoodcraft]

Ok those are some pretty down to earth ideas. One more question. What is your main use for the machine. Sign shop, now and then wood carving project, everyday wood carving, furniture....how many hours do you spend on that machine in a week for example..
I don't think, from what i've been able to put together, that this is a high production machine...

[jhatcher]

This is not a production machine and if you treat it as such, it's gonna give problems.

For my cents: If you are of a technical mind, you will be more happy than not with the machine. Understand that you have a computerized machine in one of the worse environments, a workshop. Sawdust, temperature, humidity will all affect the performance of the machine. You need lube, but not too much, cause sawdust LOVES lube, it attaches to it very easily.

I suppose for me, the hardest thing is keeping the threads clean on the screws, but they must be able to turn easily or you will do like me and strip the leadscrew nuts and have to get into the guts of the thing to install new ones.

Cut a project, clean it, cut another, clean it. While it is running, listen for different sounds, keep an eye on things, feel the machine for heat, feel the flexshaft, listen to the motor. It will fuss before it breaks.

My problem is not the machine itself, but I just can't think of any cool things to make with the thing. It seems before I got it, I was full of ideas, then when it arrived, poof!

Jeremy

[Digitalwoodshop]

Hey DWS I am curious if this goes for everyone?

I have a open offer for anyone needing repair advice and it's free....

You can PM me or email me... or using my website below find my phone number on the bottom of the pages, call me.

I am in the shop 10 to 12 hours a day so the chances of catching me is pretty good.

I may not have the correct answer but we can look at a few options to solve your problem.

I have had most of the problems already myself so it's second nature.

If you email me, I can send you pictures too.... I have not found a way to post pictures with a PM.

There are many here with as much repair experience as I do so between all of us we can point you in the right direction.

I understand why LHR charges for Tech Assist, It keeps the lights on at LHR and that is a good thing....

AL

[Icutone2]

Welcome! I say "learn your Machine" Most of my failures are from "Operator error" It will not always do what the operator is thinking. Just my thoughts.
Lee