Results 1 to 3 of 3

Thread: Upgrade to 1.153

  1. #1
    Join Date
    Feb 2008
    Location
    Tucson Az 85742
    Posts
    87

    Default Upgrade to 1.153

    I've been holding off on upgrading to 1.153 because of the issues that have been mentioned of loosing patterns or unable to access 1.13 patterns.
    If I upgrade one computer to 1.153 and leave the other one 1.13 do I need to get a separate memory card for the 1.153 or can the existing one be formatted back and forth?

  2. #2
    Join Date
    Dec 2006
    Location
    Brunswick, GA
    Posts
    8,107

    Default

    Quote Originally Posted by jiml View Post
    I've been holding off on upgrading to 1.153 because of the issues that have been mentioned of loosing patterns or unable to access 1.13 patterns.
    If I upgrade one computer to 1.153 and leave the other one 1.13 do I need to get a separate memory card for the 1.153 or can the existing one be formatted back and forth?
    You could go either way, but it would be handy to have an extra memory card anyway - that's what I would do.

    I am puzzled how/why you could be 'losing 1.13 patterns' and/or 'don't have access to them'. I haven't heard of anyone else with that issue. I know I certainly didn't lose any patterns or access to patterns when I upgraded from 1.13x to 1.153.
    Michael T
    Happy Carving!


    ═══ Links to Patterns & Resources for CompuCarve™ & CarveWright™ ═══

    Visit the CarveBuddy Website for Additional Exclusive Patterns and Resources

  3. #3
    Join Date
    Aug 2009
    Location
    Whidbey Island, WA
    Posts
    2,253

    Default

    on a side note Jim....

    Where are you in Tucson? I'm in Rita Ranch.

    Lawrence

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •