Rotate Board

[Aaron B]

Rotate Board: Say you have a board 36*14. When you see the board on the screen the 36" length is horizontal. Is there a way to rotate the board so the 36" is vertical. I know you can manually rotate it and get it that way didn't know if there was an easier way.

I have text that is rotated 90 degrees and it would be easier to place and layout if I had a button or option to rotate the board. Maybe there is and I am missing it.

[David M.]

Your not missing anything, I've had this same issue and there so far isn't a better way that I've found to change the orintation. It seems like a simple fix to the software, so long as you stay within the 15" limitation this should be an option. CW guys???

[Juno2]

You want your length to show vertically?
.......edited

I gotcha, I just tried to do it and can't find a way here either. You should still be able to go up to 144" length and view at a 90% rotation if you want. Since the viewer is 3d based, a 90% rotation should be an easy add.

[RobertP]

All you have to do is rotate the board to the vertical position and hit the square button, it will flatten out the board so you can work vertically.

[Juno2]

TaDAaa! haha nice, Thanks!