Junior Member
Design Help
THe attached photo a friend wants carved. The problem I can't overcome is that when changed to a grey scale, the weeds growing out of the wall end up being carved the same as the joints between the blocks, either above or below. How can I get the weeds to extend out and the joints carve into the piece. My only photo softwares are Paint Shop Pro and Paint.net. ANY suggestions would be greatly appreciated. Tom
Another day above ground is better that the alternative.
Member
Can you post a bigger picture can't really see it.
Ver 1.179
HP-Nvidia HD Video Card
Windows 7 Ultimate
Scanning with Carvewight Probe and Next Engine 3d Laser Scanner HD
If you have any scanning needs let us know.Check Out Our Patterns in the depot under eromran
If you allow it to happen, you can let today erase all of yesterday or if you choose,you can let yesterday erase the rest of your life.
Ed
Junior Member
Design Update Photo Help
Every time I resize the picture to meet upload requirements I get something this small. I must be doing something wrong.
Another day above ground is better that the alternative.
In Memoriam
undrtkr,
If you have a graphics program something like photo Shop,
you might trying to use the magic wand to hight light the
the foliage, and reverse the color to make lighter than the wall,
then it will stand out from the wall a little when it's carved.
Just a thought
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
Junior Member
Design Help Photo update
Hopefully this will be better
Another day above ground is better that the alternative.
Posting Permissions
Reply With Quote