Front Loading Dust Collector Interest

[fwharris]

Here is a link to my site for the info on the DC-Inserts that I am making and selling.

http://www.ringneckblues.com/Dust_Collector_Insert.php

If you have any questions drop me an email..

[Tom Spaulding]

I finished my dust collector, its working very well for me so far.
Mine bolts to the deck using two M4 screws. I used a contour gauge and scroll saw to make the sides.

I attached a couple pictures:

[hess]

Here is a link to my site for the info on the DC-Inserts that I am making and selling.

http://www.ringneckblues.com/Dust_Collector_Insert.php

If you have any questions drop me an email..

Just got a DC hood from RN and seems well made very lite easy fit and I can get to the Rock with lots of room by placing the rock to the left normal station.

I will make a run tonight to see how well it works

Got Buds also but need to cut it out that is the advantage of RN it is already done for us lazy old farts

[fwharris]

Just got a DC hood from RN and seems well made very lite easy fit and I can get to the Rock with lots of room by placing the rock to the left normal station.

I will make a run tonight to see how well it works

Got Buds also but need to cut it out that is the advantage of RN it is already done for us lazy old farts

Hess,

Glad to hear the DC-Insert made it to you. I hope it really sucks for ya!!!

[hess]

Hess,

Glad to hear the DC-Insert made it to you. I hope it really sucks for ya!!!

I once worked with a Female RN that said she could suck the chrome off a trailer hitch.

It did well I ran the Apple box just to test and there was almost no dust left in the box

Thats running the DC at full open and the DD at 50% so no C/O here

[fwharris]

I once worked with a Female RN that said she could suck the chrome off a trailer hitch.

It did well I ran the Apple box just to test and there was almost no dust left in the box

Thats running the DC at full open and the DD at 50% so no C/O here

Hess,

LOL,,,

Great report back and thanks!!!

[hess]

I wanted to give a f/u on RNs DC. Im now running 2 on my units

The fist thing is they work well barely anything left in a carve after 6 hrs. Even in Cedar which goes all over the place.

Picks up the heavy wood like Walnut and Cherry the same.

There was an issue with his cramp sys which he has already fixed whit a heavier hold down which once in place I have been able to change bits in the Rock without removing the DC hood.

This is a very lite hood, I had to remove a bit of my Door but was no problem using a lexan knife you just draw a sripe line 3 or 4 times and pop it off like glass use a metal rule to do it st.

I can not tell you how much this has cut down on the dust in the shop.

I have Buds Pat but have yet to cut it out

Also RN shipped fast got mine in 2 days

[al2888dj]

works really well ,also fast shipping ,easy to remove bits ,using the rock thanks rn

[fwharris]

works really well ,also fast shipping ,easy to remove bits ,using the rock thanks rn

Alex,

Thanks for the post!!

[fwharris]

I wanted to give a f/u on RNs DC. Im now running 2 on my units

The fist thing is they work well barely anything left in a carve after 6 hrs. Even in Cedar which goes all over the place.

Picks up the heavy wood like Walnut and Cherry the same.

There was an issue with his cramp sys which he has already fixed whit a heavier hold down which once in place I have been able to change bits in the Rock without removing the DC hood.

This is a very lite hood, I had to remove a bit of my Door but was no problem using a lexan knife you just draw a sripe line 3 or 4 times and pop it off like glass use a metal rule to do it st.

I can not tell you how much this has cut down on the dust in the shop.

I have Buds Pat but have yet to cut it out

Also RN shipped fast got mine in 2 days

Hess,

Thanks for the update on the lock down system change and your input on that change!! Yes more stable for holding the insert in place.

And a very big THANKS for ordering your second insert!!