EDIT: This thread has been closed. Let's remember that this is CarveWright's forum, they pay the bills to keep it going. It is just downright rude for another company to use this space to do their marketing. (Product announcments are OK, but this has gone way beyond that.) If you have a CW related product to sell feel free to announce it here but do your own marketing, start your own website, etc. Don't use this forum to collect a customer list. - Jeff_Birt
This post is being started to do a Head Count of Members Interested in purchasing the Eliminator Chuck.
This Head Count post is for the Machined Version with Threads matching the LHR Z Truck. A Direct replacement for the current QC.
They don't exists as of today, but after a conversation with Joe, I believe that a show of hands would be a great motivator for Joe to invest the Money and Engineering into making the Exact Matching Chuck.
On another forum, Sawmill Creek, there was interest in a Flame Polisher that takes Water or H2O and breaks it down into H or Hydrogen. It makes a pure flame that is used to polish the edge of acrylic plastic after sanding. Any other torch will blacken and burn the edge easily.
A Show of hands was posted that lead to orders being taken and this week my Polisher Showed up.... A Joint Buy was made from a company in China, of a quality unit saving me HUNDREDS. I will use the CW to cut Acrylic name shapes and other shapes and flame polish and LED Edge Light the item.
Without the Head Count and Joint Buy, I would not have a Flame Polisher.
So this post is intended to post your interest in purchasing the Eliminator Chuck that will screw directly to the end of the Z Truck, and HOW MANY.
Interest posts only please. EDIT########This is not a thread to debate why we should not buy one.#########EDIT
EDIT: Discuss AWAY.... What better place....
This thread will benefit the whole CarveWright Community, so I believe it will be appropriate to be posted and should not be removed.
We, as users understand that removing the QC and installing the Eliminator Chuck will most likely void the warranty. Most of us here are YEARS out of warranty.
In the last 2 years I have invested $2500.00 in Repair Parts, Bits, Patterns, and Software for my 3 Machines. Having a stock of repair parts saved me when my Flex Shaft Core broke in the center the other day. Back up and finished the project.
It is my belief that the use of this Eliminator Chuck will be a very positive improvement to my 3 machines.
SO Put me in for 3 and possible 4 as I am still keeping an eye out for machine #4.
Thanks,
AL
With close to 3000 posts here, I believe this is in the best interest of the community.