Rotating Letters

[Jossef]

I am trying to make a plaque and I need to rotate a letter. I have rotated all the letters but one and now I can't figure out how I did the other letters. I am using an Apple so I do not have a center mouse button.

[Jossef]

Got it fixed!! No problems now!!

[AskBud]

I am trying to make a plaque and I need to rotate a letter. I have rotated all the letters but one and now I can't figure out how I did the other letters. I am using an Apple so I do not have a center mouse button.

Here are two options.
AskBud

[ChrisAlb]

You can also simply type the angle you want in the angle box.

[tcough3475]

Have a clock face I'm working on and want to rotate the numbers as they go around the clock. I'm using Times New Roman and centerline, the numbers rotate, but then appear to be italized. The 3, 6, 9 and 12 appear OK when rotated, but the rest look italized. Any ideas/suggestions?

[DickB]

Post your mpc please.

[SteveNelson46]

Have a clock face I'm working on and want to rotate the numbers as they go around the clock. I'm using Times New Roman and centerline, the numbers rotate, but then appear to be italized. The 3, 6, 9 and 12 appear OK when rotated, but the rest look italized. Any ideas/suggestions?

I made this example and they look okay to me. Try a different font. Like DickB said "post your mpc"

[tcough3475]

Clock Face.mpc

Here's the mpc. Would have posted it earlier but was at work.

[tcough3475]

I made this example and they look okay to me. Try a different font. Like DickB said "post your mpc"

Sorry, don't have 2.xxx Did try a couple other fonts but had the same results using something I like.

[SteveNelson46]

Have a clock face I'm working on and want to rotate the numbers as they go around the clock. I'm using Times New Roman and centerline, the numbers rotate, but then appear to be italized. The 3, 6, 9 and 12 appear OK when rotated, but the rest look italized. Any ideas/suggestions?

Try these numbers. They are all vectors so you can assign a bit to any depth and size without distortion.

EDIT: I had the 10 and the 11 angle of rotation off by 10 degrees. I fixed it