Al,
good to see some 8/4 thick boards..
what type of wood have you cut in this pic maple?
LG
Al,
good to see some 8/4 thick boards..
what type of wood have you cut in this pic maple?
LG
Sweet! You way ahead of me then...and at the end of the winter I get a soil anaysis
Happy carving , Jeff Birt
Check out www.soigeneris.com for CarveWright Accesories.
Home of the 'Carving in the Dark' back lit LCD kit!
Jeff,
That whole pile is Oak in that batch, 2 trees that were blown down and hung up for a few years.
I like to 8/4 some stuff and hope to later book match it. I do have some Maple Cherry, and Walnut from the Philly Logs when I had my house there. The quality is fair to poor since they were damaged trees but FREE wood is FREE wood....
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
I was lucky that the logs or trees were near the township road so my thin tire converted boat trailer worked well. I made this rig to let me carry the logs on my trailer, ramps with 4 x 4's and pickets to keep the logs steady. It has a high center of Gravity but the trip home was short. I would love to someday have a Forwarding Trailer with a Grappling Boom on the Trailer to lift the logs.
Used a chain and manual come a long to pull the logs to the road.
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
More pictures of the Trailer.
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
wow al you the man
jeff
DO NOT FEED ! THE DRAGON
Here's how I haul my logs. The John Deere does the loading. I recently got a 5,000 lb Autocrane off ebay to mount on the truck.
Last September after Ike went thru Indian I had Three Walnut, two Cherry and a Hard Maple on the ground, Instead of making fire wood out of them I purchased a Wood-Mizer LT10. I been looking at this band saw mill for some time and said to myself, self buy it. For anyone who isn’t going to do a lot of sawing this is what you need although it will saw 100 feet per hour at a reasonable price. See site below.
http://www.woodmizer.com/us/inside/n...ons/index.aspx
$3000 is to high of a price for me
jeff
DO NOT FEED ! THE DRAGON