-
QC chuck
I through a bit out of the chuck and now i can't get it to **** ?
Help Jim
-
Check your ball bearings on the inside for damage. Give the insides a good rub with a rag and some 3 in 1 oil. Also, try turning the outer "sleeve" of the QC to make sure it isn't in the locked shipping position. If that doesn't work, give us a call at Hardware Support and we'll go from there.
Barry
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules