Thanks gang.
Type: Posts; User: Nick68; Keyword(s):
Thanks gang.
Hi gang...how does the CW know if im calibrating for a 2in. dowel vs. a 4in. dowel. First test was with a 2in dowel, all went well. I placed a 4in dowel into the rotary jig, calibration is over...
I also purchased the Universal sled. I guess I could add tension to the rubber belts by adding 2mm washers to the springs located in the x feed trays.
Your not alone...im having same issue. Moving the cut path 3.0in away from brass roller, decreasing depth to .125, adding sand paper to underside of board, adjusting head pressure, squaring the...
I wonder if the same smooth wheel is to be used on the z belt where dust is more of a problem.
Yes...to the smooth wheel
Base = 13.75y, 19.0x, .75z
Rails = 1.25y, 19.0x, .75z
Front/back blocks = 9.0y, 4.0x, .75z
Base + rails = 13.75y, 19.0x, 1.5z
Base + F/B blocks = 13.75y, 19.0x, 1.5z
The partial massage is from...
The machine will just bob three times trying to touch the right block (sliding plate) and then ask for the board thickness.)
Hi B. long time user(09). bought new c machine in july. Made a sled so...
CW rocks! Thanks for all your help.
Hello Lynnfrwd, it is unfortunate that I purchased the new CW under my old CW store log in...and when I purchased the CW pro3, I purchased it under a new store log in. Do you have a solution?
New Machine, part 2. Hello, over the years(09) I have purchased many patterns, projects, and center line software. The Pc that used to run no longer runs. The old machine(b) made its way to the land...
Ok, took the upper hand and flipped the CW on its side, removed the bottom to discover that the logic controller was not plugged in. Time to take a closer look at this CW.
Ya your right, in that some resistance is to be expected...but sadly non is present. As to plugging in my old card, this to didn't work. Thank you for your advice, ye elders of the CW forum
The contrast dial is not working because no juice is getting to it. Looks like this CW is going back to Texas.
Just got a CW, my second one. Plugged it in, inserted the card, flipped the On switch and nothing.
Are we still having power board problems.
Ok, I will continue to be annoyed until I can afford the 2.0 upgrade.
CarveWright still rocks in my book!
p.s.
I think this problem is the first "problem" that was not an Operator Inflected...
Hello, and welcome to my problem...When I use the circle tool I get inconsistant measuring results. Lets say I want a 4.600" circle: Click circle tool, place cirlce on board, inter dimesions(5.600")...
Mamasita rosa!
Check this out gang....http://www.drugstore.com/neilmed-sinus-rinse-regular-kit/qxp142205?catid=183027
Ya, what he said.
I really injoyed reading this thread...Thanks bergerud for starting it and finishing it.
Yep, I second that....
I use this two files for the same board/project technique when carving corian.
First file is an out line of the pattern to be carved using the 3/16 cut bit.
The second file is for the actual...
Hello everyone.
My name is Brian.
Dear ladies and gentleman, I wish to take this opportunity to thank each of you for your submissions to this forum regarding how to's and opinions related to the...
Ya, thats what I'm talk'n about...
Hello my name is Brian and I am an CW addict.
Very good work Omextreme.