Search:

Alan, Thanks for the wonderful tutorials and looking forward to more, I think I may finally be getting some of this in my dumb head!

Is anyone else having trouble with attachments #4 and #5? I...

JerryB;
You may want to consider running 1 main 4" with y drop offs at each piece of equipment and a gate at each "y", the only one you want open is the one you are using!

Unless you have a...

Since some are telling their age I won't feel so young!

There were some good times while serving along with the bad ones, US Army Corps of Engineers 1959 - 1967, visited Camp Casey Korea in 59,...

Don't know if this will apply but on mine I go to Program files(x86) then Carvewright then Samples folder is where all my works are stored!

I am not sure if you are attempting to make an oval sign or a square sign but for sure you will cut off your text the way you have it now!
If you are trying for the oval maybe using the arc tool for...

Very nice, I agree with others, Rock or Curly Maple! I have a piece in my shop I bought for turning on the lathe, damm thing was so hard after a few catches I took it off and it still sits on the...

Chay,
A great resource for tutorials including what you are looking for provided by Ask Bud iis
http://www2.wcoil.com/~nharbison/cw-askbud%20downloads.htm

Although I have been very much inactive in the forum I still read (lurk) alot and thought since I am in the 5% I would let you know I did read this. I am sure I could profit from group meetings......

I do have a couple of G's products in my shop but only go there when it is necessary, spent too much there already!

Well I think it may be possible to get my CW back in running condition now that warm weather is upon us and if anyone gets involved in the Little League Baseball World Series later in the year I am...

Thank you Vets, past and present!

I'd do it again even with the Nam thing, I never regretted my enlistment or the 2nd term, it was not all good or all bad for sure, I have said many times I wish...

Thanks Al, like i said I wasn't sure but I would rather be wrong than not ask!

Ken,

I took that apart and it seems to go around smoothly, that plastic gear looks clear cept for the little grease in it, the plastic cover is intact.

I do have the 14 pin connector but I am...

Ken and AL,

Well I went to blow out everything and removed the board I had in, raised up the head and took out my cutter, Now I have to eat posssum, there is some roughness but it is mostly...

Ken,
I just pulled the flex cable, took off the 4 bearing covers and found one speck on the bearings, it actually looks real clean. Moved the chuck up and down and I feel no resistance such as a...

Started a project today and it asked for 1/8 cutting bit, loaded it and when it went to the bit plate, the plate came out but bit only went within 1/4" of touching. Also when it tried to touch board...

Terry,
Couple questions for you. What bits were used for this and are you using the Rock chuck?

They do look really nice!
Thanks

I took the bottom cover off today to check for anything loose.

while on the side I plugged the machine in an bingo it worked but I didn't know why.

So without putting the cover back on I sat...

Carvenow, I just attempted to change the contrast, it will show red blocks on top and then black blocks under so I guess that is not the problem.

Al, I have the card in the reader and have 1.71...

Al,
the black squares are what I have, might be computer since I did leave the memory card in the machine the day before, I did turn the machine off and pulled the card then put it back in and...

Don't know what happened, turned machine on yesterday to do a project and everything looked fine but due to time left I thought I would do it today and turned machine off.

fired it up today and...

Gary,
Thank you for the offer to help however I didn't make it clear, I found the solution by upgrading to the newer version after the incident!

I was just working with a design in designer and saved what I was working on under a new name. attempted to reload original design and it came up but the woodgrain was not there, tried other projects...

I just tried that link myself and got

Invalid Forum specified. If you followed a valid link, please notify the administrator

1st time I even noticed the topic!

Michael,
I know I bark up the wrong tree at times, you can but the depth of the carve region must be reduced me thinks, ie., make carve region the depth is at .250 set that to .125 and certerline...