Just reloaded the software and the problem has been resolved. Version 3.106 build 38. Hopefully this is not something that has to be done every time there is a windows update.
Type: Posts; User: chief2007; Keyword(s):
Just reloaded the software and the problem has been resolved. Version 3.106 build 38. Hopefully this is not something that has to be done every time there is a windows update.
I had the same problem, reloaded the designer software and the problem went away. Just had a windows update yesterday and the problem has now reoccurred. Going to reload software and see if that...
Import this image Henry should work for what you want - if you need is square you can crop it on the import.
Haven't posted any on my work for a while, so thought I would post a couple law enforcement badges I recently made.
Alan Malmstrom - Work of Art Designs, gets the credit for making the patterns...
Check the board tracking roller - see of there is a hole where the bit touches or if no hole is there, check the play in the board tracker assembly. I had one where the unit was broke and caused a...
Interesting - I will see if that may be the problem. I use Version 2 and 1.187
Will do Al, and will see what comes about.
Yes - carved it on my other machine to complete the project
Having a problem I have not encounter before.
I am carving a military rank plaque with keyholes on the back. Load the back keyholes cut just fine, flip the board and start carving the plaque.
...
Try thess posts
http://forum.carvewright.com/showthread.php?20798-Kansas-City-Cheifs-Logo&highlight=Chiefs
http://forum.carvewright.com/showthread.php?12342-KC-Chiefs&highlight=chiefs
Here is the link to get them at sears, Pricey, but they are the correct brushes. I purchased some before the price went up.
...
I found this occurs when there is a slight static charge to the machine. It could happen when clean the machine via a shop vac or even through the dust collection system if the dust collection system...
Canemaker,
You can purchase patterns from them, but you must contact them first to get them in .ptn (pattern format) unless you have the STL importer. As lynnfrwd state, several of the Vector...
Sent you an email
Great Work! - Turned out extremely well - I look forward to seeing more projects in the future and always here to help in needed.
Here is one to look at.
Not exactly the same - but maybe it would work for your venture.
Still turned out excellent Dave. Rotary Jig may be my next purchase along with 3.0
This one has the Hs raised from the clover.
Your welcome - I made it with Designer 1.187 and pattern editor software. For best results set bit optimization to best and carve it with Optimal carve setting.
Enjoy!
If they are not broke here's a temp fix you might try,
You can carefully remove the rubber seal from the bearing and soak and clean them with WD40. Once you have them clean up and turning freely,...
Here is the link to where you can look at the basic package for the Carverwright CX. Software you can download from the Carvewright web site. 1.187 is free, but I would recommend purchasing...
You can use DXF with the old version of the software you just need to purchase the license. I use it with 1.187 and 2.07
Here is one I have
Not the best but give it a try and see if it works for you.
Just import the image
Here is what I found on the web and converted - hope it works for you