Search:

Wan2b that was not called for. I thank you. I forgot that you had that contact info. Once again thank you, but they were on me.

Not sure of dimensions, but looks like is should be able to be seen, I am making a sign for a firewood seller right now, which should measure around 24" by 18". It will be a two piece sign. This sign...

Thank you, I also see the mpc can be sized to smaller carve. Up here we have musky which is a fairly large freshwater game fish and something like this could be put to use.

There are not that many folks lurking here as of late and you two seem to try to help however you can, so they are a way of saying thanks for all you do for anyone that crosses your path here. I hope...

Let me know if parcel arrives.

Very nice, the carve looks like it will do the trick. I'm going to have to get some coin together and pull the trigger on the new software. As far as the gluing goes, what I do when the work keeps...

I hate to be the bearer of bad news but, no the card can not be uploaded from.

Great work Rick. The spar if a few layers thick should do the job for a few years. I have signs that have been hanging on a couple gates for about ten years now. The only spar failure I'm is where...

I placed an order for padded envelopes today. After I receive them I will ship out the belts. Thinking I should a shipping early next week.

PM sent to you

Now you have a PM

Well I got the new belt installed. I did four carvings after install with no issues, so I feel these belts will preform as well as the original belt. The Y axis belt is not the easiest belt to change...

Oscar, once again you have gone above and beyond. These are great. We can get humming birds thick as fleas up here. Carvings with the bird go over very well. As you walk through the northern forest...

The eagle looks great. I like the new paint scheme. Great work.

Have you checked the motor brushes? On the two other machines. I do think Want2b is correct on the orientation of the switches and what job they preform. Sorry I forgot about the keypad option for...

Yeah that's what I got looking at it in designer. But very nice test to look at and see the issues. You did state that this was a test pattern. There are a lot a designs that could that a look like...

If I''m understand this correct, you see the flex shaft housing flex a bit before faults out? If that's the case the motor may be fine yet. Pull the flex shaft out of the Z truck. You should be able...

Well I took my machine apart to get the answer I needed. The belt is a closed loop belt. i am going to be ordering some belts this evening. I will be getting for about 5 dollars each shipped to me,...

Does anyone know if the Y axis drive belt is a open or closed loop belt? I just tore up my Y axis belt and LHR is not showing this belt n their parts pages. I only found one belt for the x axis.

I really like what you did with the eagle. However I do feel the stripes should have gone out to the tips of wings. This would make the stripes look longer then the star field. As far is the tail, I...

Great work and like Oscar said, Thanks for sharing the info.

Just getting in from a weekend of cutting and swearing. Great image there Oscar, my hats off to you. Hope everyone enjoys this holiday we have. Freedom First

Wish you were closer to my area. I would set you up with poplar. I have hundreds laying on the ground after a tornado hit on 7-15-22. Last weekend moved about 500 trees off the roads of the property...

Great eagle, reminds me of an old defiant poster I had when I was a bit younger. The poster had an eagle coming down on a mouse that was flipping the eagle off.

I am waiting on a light bar to arrive, so I can get the measurement of the light bar. After which I will be able to get the board sizes I need for the build. then I will be able design the light...