What about the long crooked sides? Will I have to cut a piece that matches the curvature real close?
Type: Posts; User: Tractorman; Keyword(s):
What about the long crooked sides? Will I have to cut a piece that matches the curvature real close?
I want to carve our name on an elongated slab of a log that is 3” thick and 36”
long by 12”wide and shaped irregular on both long sides. The two ends are pretty straight.
Would I have to build a...
Can I raise the head up? The bit is in the Board so I can’t move the board.
Will I be able to resume carving or have I lost this project?
What do you do when you get a “ X Axis Stall” message in the middle of a carve?
I’m having trouble understanding how to install the RingNeck DC.
Do you have to cut the clear plastic door or cut the black piece below the door?
Thanks in advance- everyone’s help has been...
Is it ok to stop the machine and vacuum out (with a shop vacuum-occasionally I get a shock)the sawdust and then restart the machine.
Or is it ok to let the machine finish and the sawdust buildup...
Thanks - I’ll give it a try.
I was vacuuming around the machine and accidentally hit the on/off switch- how can I get it to resume carving?
When I crank the head down and it begins to apply pressure - the end towards the keypad goes down and the other end becomes stationary. I measured the distance from the work piece and the keypad end...
What font and bit do you use for very small font?
How small can CW make font?
What bit do you use for very small font?
It has the old chuck - would you replace it with the Carvetight spindle?
Can you send a pic of your headboard?
Gary,
can you send a pic of your headboard? I want to add to a queen sized headboard.
A friend gave me a 2009 B CW machine - it has 350 total hours, needs a new feeder belt and flex-shaft. Is this machine worth restoring? Any idea what it would cost to make ready?
How do you bring a new font into Designer and use it in a sign?
Thank you!
There are a few fonts that have different symbols - Webdings and Wingdings - how do you pick “one”?
When I save a project - I can’t find it - it’s a mpc file. Where did it go?
Also the projects that I saved are no longer in a list but under a CW pic.
When I click on a pattern file - on my iPhone - I get a message that says “open in files “- but I can’t open it. How do I open a file from the Pattern Sharing category? Thanks for your help.
When carving is finished - the truck ends up on the far left - sometimes I like to replace a 60 vee bit with my Carving bit - how do I move the truck to the center?
I know that it will move to the center with it prompts me to change a bit - but sometimes I want to change the bit when the spindle is positioned on the far left - is there a way to move the spindle...
My carving piece is painted dark and I’m getting the “check sensor” message. I read somewhere to put a strip of masking tape on the piece- exactly where do you put the tape? And how much? Thanks
When I finish my carving - I use the Edge Rout icon to put a border around my carving- but it doesn’t make square corners- see my pics. What should I do ?
I used the Edge Path icon.