Search:

Just a follow-up...

The problem was solved by the CarveWright programmers with a new Firmware version (version 3.104)

This new version compensated for varying length of travel in the Z axis...

The truck is not bottoming out, nor is the chuck hitting the material, says he.

I didn't even ask if he's tried this on one of his other machines! (I was so narrowly focused, it didn't even occur...

It's definitely not touching at the brass roller. I thought of "sticky" movement causing a false "touch down", too. Checked, lubed and according to the user, all is ok and smooth.
This user is very...

Glad to know you got running again! Bergerud is a fantastic resource for all things CW! (and UCB too, of course!)

I've been contacted by another CW User (not using the UCB) but using a board that is 1.25" thick x 13" wide. For some reason, after a Basic software/firmware update, the machine no longer prompts for...

Is your board a dark color? Too dark and the board sensor can't "see" the edge.
Cure: Apply a strip of masking tape onto the board along the Y-axis where the board sensor travels across the board....