You can always raster carve the area with a 1/8" feather (not flipped), hen go around it with a 1/8" cutting bit with a 1/16" inset to square up the edges. Quicker to design, but longer to carve =...
Type: Posts; User: cestout; Keyword(s):
You can always raster carve the area with a 1/8" feather (not flipped), hen go around it with a 1/8" cutting bit with a 1/16" inset to square up the edges. Quicker to design, but longer to carve =...
I still want a cross section view so you can see how close a 2 sided carve is. Sliding it to the end does not always work, especially for complex projects.
Clint
I agree about the move from the rotate function back to select - a real nuisance. But another nuisance that arrived with the program rewrite was that the snap to grid, which was and should be the...
I am not worried abour between reboots. The settings change every time I grab a different pattern or draw a line - anything. It goes back to not snap and demensions on every time I make a move. If...
The snap to grid no longer stays on - resets to off by itself, and the display dimensions no longer stays off - resets to on by itself. Both are a pain in the butt. When I am designing something...
The Tweak Level was added to the pattern editor and it is great. Now fix the Tweak Rotate tool to compliment it.
Clint
They are finally doing it! I guess they still do listen to us! Now if they would add concave and convex curve to the feather we would have everything we need - until we think of more.
Thanks for...
On the presoective view: if you want to see what a piece will look like to your eye, keep it in prespective view, but if you want to line something up to a nat's eyebrow and your snap is set to 1/8",...
Better, as I have posted here for years, would be a cross-section view. Draw a line and get a coross sectional view at that point. You could see how a front and back carve line up and how...
Do the developers read this stuff? Now that a 3/16 straight bit has been added, how about arranging the bits in the proper order. The smallest should be first, not in the middle, then add a 1/4"...
I have my computer hard drive partitioned as System, Office, Studio, Games, and Storage. The CarveWright folder on the Studio drive has the program, projects, patterns not in the library, and...
I would like to use a 1/4" straight up-cut bit sometimes.
Clint
I would like to be able to be able to evenly copy a pattern or selected item(s) X number of times around a point. For instance, if you had a triangular pattern, you could copy it 6 or 8 times around...
I agree that rulers (like a CAD program has) would be a big help, but; now we have a new version of the program I will repeat my earlier requests. I need a cross section view, so if I am carving a 2...
1. And I have listed this previously, we need be able to see a cross section. If you are doing a two sided domed one side concave the other with patterns applied, you need to see how thick the piece...
That would work. I just tried it, but you have to lock the length.
Thanks
Clint
The pattern sits diagonally in the box that defines it. If the pattern is vertical or horizontal the box around it has the same dimensions as the pattern. If you rotate the pattern to unvertical,...
I know there is an adjustable grid, but if you need to do a diagonal measurement the does not help. I made a pattern to exactly fit a guitar (actually base) pickup. I put one vertical and one on an...
A cutaway cross section view would be a big help. You could see just how high that pattern stands above the carve-out area. I have noticed that a deeper carve-out means a higher pattern. Some...
If we could draw a line and see a cross section view at that point. I found that if I place some patterns on a 0.6 deep cutout, they come out too big. And how high is that dome? With this we could...
The problems with using cove or round over bits around the edges are the corners are round and any objects neat the edge of the cutout will get cut. It is just a wish and would be nice, but not...
The biggest problems I had were fixed with the draft and make pattern tools, but I would like to have the option of concave or convex feather.