Search:

Latest that will work is Mojave (10.14)

I'll let Joe know.

You cannot see the tabs, when using the cut path tool. They are there as shown in your settings.

Seems to still be in possession of this machine.

So, it has a broken base?

We have the CarveTight in stock, unless you are looking for an old Quick Change Chuck. Be careful that it is not a bad one.

If you are just doing text (no pattern) you can get away with depth of carve region and text at 0.125. Taking out less wood, speeds up the carving time.

An image is imported as one unit. You cannot separate the pieces. You can use Pattern Editor or Pattern Sculptor to manipulate your imported (unlicensed) pattern.

I would not go to .35 or use the Large Draft. Small draft with bit optimization best and 1/16" carving bit.

Sounds like taper of the bit hits the line and makes it thin when it goes that deep. Add draft and bit optimization.

I am always hesitant to direct people to this location, because trying to open the Favorites file results in it multiplying like rabbits. You can only see what is in the file through Designer. You...

The image (now pattern) goes into your Pattern Library (Blue Shell icon) under Favorites. Click once on pattern and once on your project board to place it or click and drag to the board.

The patterns should all work with Basic or PRO. Some of the projects will have PRO 3 on them, if only usable in Designer PRO.

Gary:

Try this: https://www.foxinfotech.in/2019/06/macos-mojave-prevent-mac-from-sleeping.html

Sounds like you have not turned off AppNap.

From the Applications folder, right click (or equivalent) on Designer Icon. Go to Get Info. Check the Prevent App Nap box and hit finish.

If your arc connects to lines and is supposed to be a closed path, use Cut Path tool after you get it fully connected. Tabs are automatic.

If just arc, you can use Select bit, but there are no...

It won't. Like I said, we send them out without clear covers now.

Cut Path tool can only be used on a closed path. ie circle, square, rectangle. For an arc, you would need to assign a cutting bit (Select Bit tool) or make sure your path is fully closed. Go to...

We aren't putting the clear cover on any more. It just traps the sawdust inside.

Blow it out and retest to see if reading goes up. If it does, keep blowing.

Zero is likely a unplugged or...

Make sure you didn't accidentally unplug it while fixing the z-stall.

I enjoy them, too. Will have to see what Michael Tyler says.

We will not be doing the Project of the Month Subscription unless or until we know that we will be getting projects.

If you have POMs remaining on your subscription and would like to select from...

I registered your new computer in Sculptor and sent you the code via email. The instructions are at the bottom of the Product page for Sculptor.

Purchased 8 years ago. C-model machine.

Yes, it has sold.