Just on here. I spent a lot of time here some years ago and remember your involvement. Thanks for all that. And good see your interactions still.
The dremel is my next option. If any idea where I...
Type: Posts; User: interloper; Keyword(s):
Just on here. I spent a lot of time here some years ago and remember your involvement. Thanks for all that. And good see your interactions still.
The dremel is my next option. If any idea where I...
Yes, I have already. The path comes out way too thick. I think I'm going to have to just barely touch the tip of the 1/16" carving then do it by hand. That's unfortunate. Maybe I'll get around to...
Ok, I just wanted to be sure that if my line is less than 1/16" it'll only pass through that bit once. I'll go ahead and order the 1/16th and give that a try. Thank you
Edit: I see the bits have...
Yes, I understand that. At 1cm it's slightly less than 1/8". But it's at that 1cm depth where I wanted the 1/16". Instead I see the bit roving through the path twice when coming at the perpendicular...
Hello guys! I'm back on here after several years of "taking a break". Glad to fire up this machine again (and it did just fine. Kept a cover on it ;)). Also hinting my machine and project designer...
Greetings, I haven't been here a while. I'm interested in this rotary jig and seeing what's involved.
Berg, are you telling me you didn't make those knobs? :rolleyes:
These shafts are oval and...
Oh yeah that'll do it. Interesting on the poor man's carrier. I'll have to find those posts. I made a similar one, but didn't think about making it two rails. That's even better. Thanks
Here are the pics of them both. That's a cool looking sled you got there. What are those protruding sides for?
Edit: The punch I'll have revised better in future carvings. I think it came out well....
I did get it done and glued together. I ended up outlining it with the 1/8" bit and it came out good. Yes, the sides were .615" and .685" if I recall, so yours must have shortened the height from the...
berg, will that adapter work for 1/16" bits? I bought some of these for veneer splicing (think artistic zigzags) at 1.5" long with a 1/8" shank. Wondering what a cost effective solution would be to...
Another obvious one, Berg. If you choose to route out the top ones with 1/8" bit, you might want to separate them a tad. Looks like I gave myself just enough room to get a band saw blade in there as...
75325
Sure. The ones at top are regarding my original post. The ones on bottom I have potentially fixed with the outline pattern with bit function. Bottom are also modified for holster molding, as...
Just curious how you are making them in designer. If you're tracing the path, are you offsetting the bit to compensate for the bit diameter?
Ohai bergerud. No, its not that. It's not even close. See here 75324
When I sliced the STL, I made sure to check "Carve to full depth", and in designer I've tried Pierced as well as setting my own...
Hi folks, I'm back! (after about 1.5 years :-?) I hope you all are doing well, and not tearing your hair out :)
I imported a bisected STL model 75309(of my SA XD-9), and curious why it didn't...
That's just the thing though. The different software suites aren't necessarily a linear learning path. Many are basically just different functions that people come across to need from time to time...
I guess to extend what you said^ the option to transfer or swap licenses for the intended software version would help (give a day at least??). That part I'll accept fault, as most people don't allow...
I was still subscribed to this.
Back when I bought the wrong software, I was told somewhere to wait for a software sale during the month of September? Nothing. Then I emailed someone, and they told...
First one came out pretty good. The two pieces have a twist play of ~1/8". That may be only thing worth fixing. But some epoxy may fix that
With much thanks to you Mr. Berg. And machine ran very...
Loctite red just on the set screws or also on the shank in the loose fitting adapter?
Thanks berg. I hope you're enjoying your weekend, and hope I'm not dragging on my questions
I did get the full...
Yes QC adapter. The stock chuck.
But before the set screws it's ok that the bit slides freely in the adapter?
I ask because the other bit set I got they don't slide freely at all.
Trim tool. OHH!! another 200 bucks for an essential tool!!?
wow. I keep thinking the break tool was closest for that. So I got the STL, need DXF and now vector suite. Don't forget rock chuck -and...
Here's is a pic of the chuck I wrestled to get the collar out. It appears to be off center and stuck out. Can someone tell me the best way to correct this? The machine has 11 hours on it, but I am...
This prog is a knob, using a T-nut for an insert. Can someone tell me how to reduce the waste on the cut out of the knob grip shown in center? I'm thinking I may have to not use the cut out tool, but...
Ugh. I thought I got everything repaired from that little mishap with the bit slipping out. I went to measure a board and realized I couldn't get the bit in the chuck. It's got a hernia. That night...