ja0djwej9hw9h
Type: Posts; User: Richard Fugazzi; Keyword(s):
ja0djwej9hw9h
Well folks found out what was causing my problem. Head pressure was around 140 # and was causing the belts to roll under and tear. CW doesn't tell that the handle clutch needs to be lubed as needed...
Both of the sandpaper belts tore along the edge facing the display. I replaced the belts and started a new project and got an error message 316. When I took the wood out I found the belt on the left...
I am using clear pines and have used it many times before with no problem. If I use tape should it be on both edges of the board, blue painters ok and how wide?
Thanks for the help
Richard
I have been making signs and the last 2 I tried to carve were ruined half way thru the project by the board not indexing to the proper location and carving in the wrong place. I checked the board...
I have been having a problem with the bits locking into the chuck. After carving very hard extracting the bit even with the tool. I have noticed the the bit holders have what appears to be...
When I start the project, after board measuring, it says load bit x. After loading the bit and pushing enter it keeps telling me to load the same bit over and over. Any ideas anyone.
Thanks
I have been using clear pine to make signs and recently I have noticed that there are some burned areas in the carving. What may be causing this. All help appreciated.:confused:
Richard
:confused:Hi All,
I have been trying to upload image outlines of US states I have captured from a web site. When I upload them to CW they become a .025 deep carving. I am using these state outlines...
Ken,
I have the same question. Seems like you didn't get an answer about the thickness of the stock. That is telling the designer you are using 1/2 in when it is actually 3/4.
I would like to...
I set up the board for the project I want to run. With the mem card in I turn on the CW. I press the "project" button and all I get on the display is
';{P>{<pop8o,[pm:>ij. The jiberish as I call...
Hi Jeff,
Thanks for your response. I reformated the card and reloaded 2 projects. Still getting the jiberish on th CW display. Any other ideas?
How sensitive is the CW to heat damage? I carried...
Today when I started my CW with projects on the card all I was able to get on the display screen after pushing the "project" button was a lot of jiberish. 0(7661w[/;de[;.]sq/qs/]. This is only the...
Hi All,
I am planning on making custom clocks. My question is after I carve the front design can I turn the piece over and carve a recess for the clock movement in the back. In other words will the ...
Here is and image.This is what I am attempting to do. I was able to do this one but have not been able to duplicate it with other state outlines. When I try to add text to the outline and unselect...
Hi All,
I have been trying to do something very simple with the CW. I am trying to make signs for RVers. Sounds simple huh? I am using an outline of the state as my base for the sign which will be...
I had figured it out from your first posting but your latest file may help even more....thanks again!
Rich F
Hi Chris,
Thanks for your help.
Actually I'm looking for a template for the #'s on the face. I am still learning the software since I only got my machine 2 weeks ago.
Thanks,
Richard F
:DHi All,
I am looking for a clock face template to carve clock designs. Can anyone help?
All help appreciated,
Richard F:)
Hi All,
I got my machine a week ago and have been trying to create some templates for signs. The primary use of my machine will be to make signs. Pretty simple, huh? I Designed one and started to...
Hi All,
I have been using a jpeg graphic, an outline of a state, placed on my project board. When I place another jpeg graphic inside the outline and close the frame around it the graphic...
Hi all,
I am waiting delivery of my machine and I have a question about the use of carbide bits other than those purchased from CarveWright. I have a number of quality carbide bits and would like...