Here is a sight of simple instructions for screenshots from different operating systems
http://www.take-a-screenshot.org/
Click on the Mac Tab
Type: Posts; User: Denise; Keyword(s):
Here is a sight of simple instructions for screenshots from different operating systems
http://www.take-a-screenshot.org/
Click on the Mac Tab
I converted the image for you. See attached
use your image editor (gimp is good) and remove all color...basically you only need the outline of the image...much like a coloring book. the colors are read as depth and the adjusts accordingly. ...
JAustin,
She does not have a full grasp on what she wants it to look like yet. The only thing I know for sure is the size of approx 20 to 30 inches.
Rich
Hi all,
A friend of mine in the Charlotte NC area, asked me to make her a sign for a rental property. The only thing I know is the approx size of 20" x 30". Not sure what graphic (if any) she...
I do cut corian sometimes...but getting away from it and concentrating more on wood. Good tips..thanks
Will check this later. Thanks...sounds like a good test
Will check these areas out
The machine is only a few months old (version C). It is not the quick disconnect...I assume that is what you are asking about
If all else fails I will do that. this machine is not that old..I bought it in March or April...and haven't put alot of hours on it. Trying to spend more time with the family too...this is supposed...
I did not set a bit optimization
Height = 100
Depth = .225
Set for best
This instance was not carving corian....I was carving into red cedar. 12"x24". Never had this issue before for...
Floyd,
This seems to be getting worse with this machine, especially on larger jobs, which is frustrating. I have cleaned it and blown it out with an air hose etc... It still seems to be skipping...
Will do, thanks
Denise and Rich
And Some more
Rich
5516155162551635516455165
A few more that I found searching online that make great carves...
Rich5515355154551555515655157551585515955160
Here is the 3d depth map on this image...55152
And some more
Rich
5514455145551465514755148551495515055151
Here are some 3d depth map images I found online. They make for a nice carve. Hope you enjoy them
Rich
5513655137551385513955140551415514255143
They have given a free copy of a project that i am interested in making, but it is not compatible with Carvewright software. Can anyone convert a .CRV3D to .DXF?
...
Thanks Metallus, will use a different card first to see if that makes a difference
Thanks Al will give that a shot
Checked the switches and there is a loose wire on the one (keyboard side) they look in rough condition as they sit. Will probably replace it just for preventative maintenance.
Thanks Bud...I am thinking it is just focused on the cover switch...I think one of them or both need replacing
I did try to cycle the power. Unplugged for 30 min to be sure...I still get the close cover error, but didn't see the E12 error again. Did not get Y or Z stall error.
Yes, I place one hand...
I had completed a corian carve. About an hour later I was asked to make another of the same thing. Its a small carving, the machine was cleaned and vacuumed before and after each use. I also have...
1. I did find the list of Error Codes. http://www.carvewright.com/2010CWweb/service/Maintenence/Troubleshooting_Guide.pdf
2. My error code is not listed. Anyone have any suggestions? Error...