Search:

I 2nd that. I just love the UC.

I took the touch plates off and the machine then asked if I want to use the project depth or the board depth. With the touch blocks on it would not ask. I then tried the touch blocks in my older...

I did the cut out on the belt and it cut out to the correct depth. Never asked if I wanted the depth of the project or board but then it never would if I used the correct size board in the project. I...

I don't get a message after the right touch block touch. IT never asks whether I want the board or the project depth. The machine at times would ask when I didn't use the shim but it hasn't since I...

Since I have started using the shims the carves are great, no lines in the carve but I have noticed that my cut outs are about 1/8 from being cut out. I ran the test for depth and it came back being...

Great I understand now. The clamp just brings the sides in tighter to clamp the piece tight between the sides. My brain was thinking the clamp was going to clamp the board to the rails.

Are the clamps themselves included in the mpc or does one need to make them or buy them?

How does the side clamping slots work? Really interested in 2 sided carves. I would like to make the ACB but wondering how the advanced part works.

I don't believe there was a main update to the original pattern, only the ACB. You can always re-download the pattern by going into the designer and then to Help tab and click on manage licenses. Go...

I used the shims and had a perfect carve. So happy. Thank you Bergerud for all the help.

I noticed you used 1/4 wood for the shims. I don't have any 1/4" wood. Can I use 1/2" wood and change the carving area to .375 instead of 1.25? I then used carve region to carve the side that goes in...

Thanks for the shims. I like the way you made them so they stay on. I am getting ready to start another carve using shims and looking forward to the carve being perfect. Thanks.

I did do a thorough cleaning of the machine before I started carving today so the rails on the machine are good. The bearings have no wiggle to them.

I will put the shim on top and see if that helps. I have included some pictures that I just carved. Let me know if you see anything that might be wrong. I can also send the MPC if you need it. Why I...

I put 3 screws in each side as the board is 13" long. After putting the screws in I used my 1/8 shim to make sure the board was exactly sitting up by 1/8". The carve is 79% through so I looked at...

Using the UCB I do not need to give the extra 7"

I thought maybe the board was moving up and down as it goes through the rollers so I then used some nice straight Red oak on the 2nd try and got the same results. I placed a level on the rails of...

I am having a problem with UCB. The last 3 projects I made with the UCB I am getting lines going down the carve 3.5" from the both ends of the project. The same problem I would have if I did not give...

I finally made the Universal Carrier and all I can say is I am thoroughly impressed by the carrier. It was easy to make, only took about 3 hours assembling and that included drying time for the ...

I have a lot of 3/4 MDF. Can I use this for the sled? If so would I need to change any of the pieces or hardware to make it work correctly? Thank you for your input.