Search:

Sorry for not replying to some of your posts. I have been battling with LHR for almost an entire year at this point over the lemon of a unit they sold me. They refuse to do anything but continue to...

I really do appreciate every ones help. The tips and tricks you have all recommended are invaluable. Although I have not tried anything outside of LHR's recommendation I'm sure the fixes previously...

Another bit snapped because the head motor decided not to start! This is the 2nd time. I go in to menu options and test it and all test fine. Next thing I know I go to cut and the head presses down...

This is a brand new machine. It did not come from the factory with loctite and I'm not comfortable putting loctite on it. That's not the proper fix. I've turned more wrenches on this thing in the 3...

New issue... LHR sent me washers to put on the crank handle between the handle and spring to increase the head pressure. When I removed the crank handle the entire assembly was attached to the...

Ok I'm back! It appears the majority of the issues my machine was having stems from the cracked clear cover and low head pressure. Chris from tech support at LHR has been extremely helpful in getting...

I appreciate the the help but this is far too many issues for a brand new machine. At this point I already put it back in the box and sealed it up. Back to LHR on Monday

Since the motor wasnt turning on and the machine tried carving it pressed the bit against the wood and snapped the bit!! Awesome product.

84548

3 attempts to carve and 3 error codes and 1 no motor start. No carrier board at all! I put in a solid clean board measuring 13" X 24" X 1/2". This is the biggest piece of junk I ever owned!! It's...

New error issue. I keep getting a tracking issue. The rubber O-ring looks fine and I'm getting this with both the carrier and a stand alone board. When it does measure it's only measuring half the...

It was a design issue. Everything looked good in the software but cutout looked horrible. The machine cut like it was suppose to. Just a learning curve from the software to the actual machine. I...

Ignore this comment. I figured out the issue.

Tried another small cut tonight. I cut 4 hexagon shapes again and I'm getting the same poor quality. They are not even/square looking. I'm using the small 1/16" bit on .5" balsa wood for practice....

I appreciate your input Al but this is a brand new machine with maybe 30min of cut time on it. If the bearings are worn out in that time than LHR needs to replace them, not me. That would be...

How does Balsa wood work for this type of design as a cut out?

Yes, it gave me the error right after thwacking the bit plate. I loosened the Y belt tension screw and re-tightened it. That seemed to fix the issue. I performed a simple carving of shapes to test it...

Did exactly what you stated above. Now I'm getting a Y axis error(stall).

I did try this before and it comes up with the same error. The problem is it's very random. I was able to make 1 carve the other day though. I tried using the jig last night with a different size...

I didn't see anything else that was obvious as far as being broke. I will take a closer look at the entire machine when I get home this evening. Thanks.

I've tried this and was met with multiple error codes as well.

I wasn't ignoring you in the other thread. As I stated below I tried using masking tape because it's easier instead of having multiple size end boards. I made my board based on similar designs and...

Just when I thought I was able to start carving....

84527

No option on how to place carving. Keep original, scale, load new board.

84526

I did not add 3.5" spacer boards but instead I used masking tape. I realized the tape was too narrow and switches to 3/4" tape. That worked. Only issue now is the machine is saying the board is only...

Sensor reading is 151.

84525