It didn't occur to me it might be the actual UCB project the OP was referring to! Re-reading the post, I'm thinking it is. Well, if so, we know there is nothing wrong with the mpc's themselves (as...
Type: Posts; User: mtylerfl; Keyword(s):
It didn't occur to me it might be the actual UCB project the OP was referring to! Re-reading the post, I'm thinking it is. Well, if so, we know there is nothing wrong with the mpc's themselves (as...
Please upload your mpc if it doesn't have any copyright unprotected patterns on it. It sounds like you did not use the Cut Path Tool for your cutouts. If you attempted a manual depth cut on your own...
How far too deep are the holes? By any chance are the holes 1/8" too deep than you specified in your design layout?
Joe,
What is the TOTAL height of the material plus the jig when put into the machine?
In all the POM instructions, I show a screenshot of the "warning" message along with a description and what the ACTUAL board dimensions should be for a given project. I endeavor to leave nothing to...
Just make sure your real board placed into the machine is at least a "tad" over 7" longer than the layout (on-screen) board. This is the normal 7" Rule - exactly how all the projects of the month are...
So COOL, Dan! Excellent accessory for all.