Yup, ran as admin, problem solved. thanks
Type: Posts; User: jtsvstar1100; Keyword(s):
Yup, ran as admin, problem solved. thanks
Hi guys, trying to open designer, its says files missing, so I uninstalled reloaded, same problem.
anyone have any ideas?
Ok thx guys
Jeff
Hi guys, can I get a pattern back off the card?
I set a few objects to the same depth and some are different.
I changed the original file, can't check it.
Thx Jeff
Hi Guys
I'm trying to get the cut path tool to work in the software.
If I use the square or circle tool it highlights, but if I draw lines to
make a shape it won't highlight.
Thx in advance...
I found that when you apply a coat of finish to
your wood it tends to lift the grain. Just the other day
I made a pen box out of cedar sanded it smooth
applied first coat of finish, 2 hours later...
Ok sounds good, will give it another try tonight.
P.S. I made the dust scoop that I found on here, my appoligies,
I can't remember the name of the guy who posted it, but it works
like a charm....
Yup, now confussed. Believe or not I have done a couple projects
that turned out right somehow.
Let me see if I have this right.
In designer the board would 10" long
In the machine I put a board...
Thx for the quick response guys.
I'm not sure about the scale thing, but I did hit stay under
rollers. board is 22" and the carve is about 10". And of course
i'm at work now and machine is home....
Hi Guys
I carved some shelf brackets last night(using cutpath) and they came out
about half the size they should have. I went back to cpu redid
the pattern and tried again and same thing.
Any...
Yes the board is just under .5, so I typed in .437
and away she went. Thanks guys.
Jeff
Hi Guys
Got my new board sensor installed.
Now measuring board correctly.
Now i'm trying to run a project
on a 1/2 sheet of plywood.
after it asks me to load 1/8 bit
it says insert board...
I wasn't doing a project at this point.
As I had just fixed the board sensor
problem(I hope) and was trying to measure
a board to see if I got the old girl going.
To measure a board, I don't...
HI guys
I was getting Board edge detection Error 400.
After reading some posts, I found that the sensor
on the bottom of the truck(2 Diodes) was covered
in dust from the inside. How on a sealed...
HI guys
I was getting Board edge detection Error 400.
After reading some posts, I found that the sensor
on the bottom of the truck(2 Diodes) was covered
in dust from the inside. How on a sealed...
Hi guys
I'm carving a rectangle 12" x 9" out of a board
that is 20" x 13.25".
Question is, how do I round the corners.
I used the rectangle tool and placed a carved region on it
that is .250...
Hi has anyone tried to carve chess men or have any ideas.
Thx In advance for any suggestions
Jeff
Do you think the lettering depth is ok.
Don't have enought experence with depth
and height yet.
I'm going to run this on a piece of basswood.
Any comments would be appreicated.
Thx Jeff
Thats what I did....... Well let me explain what I did.
I'm Making a octagon poker table, which consists of
8 pcs of oak 8.25" x 25". Out of these pcs I cut out the
chip trap which is 5.25" x...
Thanks for the help guys, but its still not coming out.
I'm guessing new Qc and bit.
Hi all, I can't get my 1/8" bit out of the QC.
I can't even pinch the collar together with
my fingers. As suggested by other posts, I
have tried tapping, sprayed some lube up in
there, tapped...
That was it, thanks.
My bit now has little marks on it and I can't
get it back in. Did the same thing happen to you.
Thx Jeff
Hi guys
Nearing the end of a project I found a set screw
3/8" long 1/8" thick with a hex head.
I've looked all over the machine with a mirror and flashlight
and can't find anything like it or...
Thx for your help guys.
Test went well, now I put in the real piece
and it keep saying "load board".
Any thoughts on that?
Thx again
Jeff
I'm cutting out a rectangle out of a 1" x 8" x 25" oak.
Will be using a sled so I can't use cut path.
In my pattern I used rectangle tool and then
used "select bit" and chose 1/8 cutting bit....