Search:

Thanks Al, this is exactly where the problem is. On the last photo that you posted it is the inner gear that is the problem. It currently has less than half of its teeth remaining. But there is...

I ran across the parts list PDF (thanks forum) and was able to track down the problem. It seems that the inside gear on the X - Drive Motor Mount Assembly (part #104) has been stripped. After...

I just noticed today a catching sound when the wood is rolling through the machine. It sounds like one of the gears is gummed up with sawdust or shavings. It really sounds bad and I am concerned...

:D:D:D

Michael, I appreciate this one little tidbit. I had just finished installing the Z truck assembly and could only get "Scan Area" when I turned it back on. Scratching my head and thinking...

I just got off of the phone with CarveWright (they called me). It seems that I am going to have to replace my ztruck with the newer version. For some reason, with the existing ztruck, it will not...

If I manually push mine down I get the "motion flush w/o servo" error. I am running firmware 1.124 btw. At this point I'd be very happy if I could manually adjust it and get a scan out of it.

Interesting, I thought that you were referring to the three screws that hold the actual probe together. I did check those. I did not check the set screws in the adapter, but I will now.

I've...

Just got it today and couldn't wait to tear the box open. Unfortunately, it doesn't move down once I've jogged it into position and if I encourage it (move it myself) along I get an error. I've...

Not sure if they were backordered or what but I just got confirmation today with a shipping number after two weeks of waiting. Now just to wait another week for delivery. :D

I ordered mine back on the 30th when they had the sale again ($224) but haven't yet received any response from CW regarding a shipping date or anything. I sent a couple of notes to them but haven't...

I think it would be an issue no matter what bit was used. I think Daniel's method would provide cleaner results but I haven't tried cutting with the 1/16" bit. You would just have to remember to...

So you substituted the 1/8" with the 1/16"? With the taper I'll bet it does look and fit better. Was your material pretty thick? Would that matter? Cut path typically takes a pretty big bite out...

Cut path does use the 1/8" cutting bit. I assumed that the reason for wanting to use the 1/16" carving bit was reduce the amount of gap between the pieces, but it wasn't clear to me. But using the...

Here are the results:

OK, the technique worked but required a little filing around some of the acute angles. I painted the pieces just to show some contrast, so when the paint dries I'll post photos.

To clarify my...

What I think you can do is create outlines (select text and choose 'Outline Pattern(s)') of your text and choose 'cut path'. You'll have to do this twice, once for the void and once for the fill. ...

Yeah, I saw that. I was going to call them and ask if I could get the $225 price since I missed the Cyber Monday sale, but now I don't have to.

Now I just have to wait for delivery.

Durtdawber, this is exactly what you have to do to get the other licenses to work. I assumed that because my designer licenses were there before that the centerline should have been there as well. ...

Yes, I did try the method you described from Omar, but that did not work either. I could see that I have 2 licenses available for centerline but there was no link or information (serial numbers)...

After getting Designer working again (ver. 1.123 on Vista) I found another issue; centerline text isn't showing up anymore. I called this time and was told that this is a known issue and their...

I am running Designer on Vista just fine on both my desktop and laptop.

I finally got through.:D

Well, as of this morning I've been able to get further through the process but still am having a problem. This time it's after I choose the license(s) that I currently have. It asks that I confirm...

:confused: :confused: :confused:
I cannot register either. The message that I get is:

"An invalid response was received from the registration server. Please contact CarveWright for a resolution...