OK so dummy here can't figure out how to convert the .ptn file to a .Mpc file. Whats the trick? Later, never mind I figured it out. Thanks all!
Type: Posts; User: Randy in Minn; Keyword(s):
OK so dummy here can't figure out how to convert the .ptn file to a .Mpc file. Whats the trick? Later, never mind I figured it out. Thanks all!
Where is a good place to find one?
I took apart the truck and found that the outer bearing race was slipping. This is what what was causing the heat. So I emailed Carvewright. They are taking care of the problem. Awsome customer...
It was time to lub my shaft so I sprayed it with the Moly lube Carvewright recommends. This was the 2nd or 3rd time I have lubed it this way. I soak/spray it and let it dry overnight before...
Thanks! Will give it a shot and see.
Nice job and color scheme. How are you guys joining the circle and rectangle together as one?
Very nice. Where do you get the material and is it acrylic or carbonate or???
Nice work. I am not sure how fussy you are on the lettering but you might want to experiment with some letters on scrap oak first. I found oak sucks paint into the wood capillaries and gives your...
Well I am glad you guys understand this Bob and Greybeard cause it is about as clear as mud to me!
I am understanding it will raise and lower the carving in a carved area and it is diferent for...
Can someone tell me what the height indicator on the bottom toolbar line is for? I figured out is raises or lowers the height of a carved object inside a carved area but what units is it in. 1-999...
Opps! I thought it was in a week or so ago. My mistake.
Has anyone picked up one of these yet? How do you like it? What have you scanned?
Thanks for asking Mike! I was just logging in to ask the exact same thing! Yes the ability to save as a JPG file format would be a nice addition.
Everyone has been talking about the SCANNER. WHat is this and what will it do for me? Does it hook to the PC or the carvewrite? Scans pictures or objects?
Thanks guy. I never put that together in my head. Works great!
I have not figured this out. Have any of you?
Assume a board any size. You want the number 3 and the number 4 entered on the board but not next to each other . you bring the numbers to the...
Nope! Not getting any of those prompts. Occasionally get a Center on width or length prompt Whe I on purpose cut a board to wide or long for later work.
Ahh, not that I KNOW Chris but how do I tell? I am making the pattern to actual finished size as far as I can tell on the software and loading boards that are exactly the size (as close as a...
Chris, I thank you for your efforts. An update. I made 5 signs like that oval one today. Just modified a tad. Update is attached called TEST. All were off to the left by a solid .25. Based on...
Paul, nope. Using a Dell PC, windows XP.
Error 2 has disappeared. Maybe I was not shuttign down the Carvewright long enough. Over night seemed to fix it. But the machine is still not centering...
Chris, I did as you suggested. Now when trying a test board I get a fatal error 2 reboot machine message. Will try to down load it to you guys today. Board sensor levels were 162 and 10 like you...
will try this weekend. Thanks for the tips and testing.
the machine has 2 sides. Key pad side and other side. Key pad side will be the top of the carvings. At least it is on my designs. By left, I mean the left side of finished carving when looking at...
Anyone having trouble having stuff centering on the new version? I attached a file below (or will try at least). These are being made for a church. The carvings etc all appear centered on the PC...
If I take a Digital photo and save it as a .JPG file, then upload it to the patterns and images file, everything looks fine but when I try to incorporate the image into the board carving, I ALWAYS...