Search:

I just wanted to thank everyone who helped me with my latest delima. I installed the upgrade parts this afternoon and the machine worked just fine. And i guess having the temperature in the high...

OK you were right about the shroud still on the motor plug - do I feel like an idiot ! ! ! Anyway, now lets move to the new Z motor Electronics Board. There is a ribbon cable just below the new 14...

My last part order included an FFC Cable (14 Pin), A Head Termination Board and a Z motor Board. The problem I was having was the machine did not see the compression rollers. Well, after installing...

I'm beginning to wonder if anyone in the technical support knows what they are talking about. I ordered a 14 pin FFC Cable, a Head Termination Board and a Z motor Mount Electronics Board. Now the...

OK - I have everything updated (card shows 1.177 and the program too). I'm still getting "Z Axis Stall" from the machine. Now I'm thinking there must be a cable that is disconnected. I've replaced...

I'm still having the same issues with my machine. Was told I needed a new Power Supply. Installed that and did a sensor check again of which the roller sensors showed "Released". Ordered new...

Just to let all know, I contacted Carvewright and ordered a new power supply, which should be received in a few days. After taking the bottom cover to check out the power supply, I noticed that...

Thanks for the info Al. I did a little more checking on my machine and found out in the OPtion Menu, I was checking out the cover switches and like you said, the left one tells the machine the cover...

I was just going back over the video for the machine and I completely forgot about the Temperature inside my shop - - it might have been hovering around 40 degrees F. Maybe I should wait for a...

When I was in the Option Menu, the cover would showed closed and when I would open it, the machine would show the cover open. Don't know about the Power Supply going bad. Guess I'll contact the...

I have been using the same bit on other projects with no problems. And the bits I do have were ordered from Carvewright and the one that came with the machine. One thing I did notice is when I do...

I keep getting a Z Axis Stall ERR E06-0313 and E06-0303. Also the machine keeps telling me to "Please Close the Cover" (the cover is closed). This just started happening today. I have just over 25...

I don't understand your delima. When I had my store guy look up the item in the register, he had to order mine, just like your store guy tried to do. This Sears didn't have them in stock either. ...

Sorry about not mentioning the price online. Yes, it will show the price of $29.99 online, but like I said, when I went into the store, the price was $6. and some change when the clerk put the part...

Yes, I have the part number which is:
Sears Item Number 00926691000, Mfr. model # 26691. It took about 4 days to come in to my local Sears Store. I thought it was a GREAT buy.

Last week, I went to my local Sears store after learning the bit adapters from the QuickRout Kit would fit the CarveWright machine. Well, I was in for a surprise when I asked the clerk to order one...

I've checked around some new home construction sites and the contractors here were willing to give the sink cutout pieces to who ever wants them.

Was I surprised when I came in from work. My probe was in and I can't wait to try it out! ! !

One other thing I forgot to mention. I took the 22mm wrench for my table saw and used that to aid in turning the "nut" on top of the chuck. Maybe Carvewright should consider making available such a...

Thanks for the information I received on my "problem". I used a hair dryer to heat up the chuck a little. Then I took some 3 in 1 oil and drizzled some in the top of the top of the bit holder. I...

I had a hard time removing a bit from the machine. I was able to remove it after a while. Now the Quick Release Chuck seems to be stuck in the "locked" position. Can't get the outer flange to move...

I had a similar problem this afternoon along with others, since I downloaded the latest version of software.

I'm a newbie also and have been using poplar with some success. Of course, I'm carving letters, so there isn't too much sanding that has to be done. I have tried red oak, but find I get a lot of...

Just got my maching last week and have been reading about the probe. As I understand it, the probe will scan "objects". Will it scan a photo or a hand drawn object and the machine will cut that...