Search:

So yesterday I tried a small litho 4x4 taped the entire piece . Had no issues. Am wondering if the correct answer is bit getting hot and melting the piece instead of cutting it. I am going to try...

Yes the machine stopped and told me to clean the y rails, I cleaned them half hearted on the first one. after that I cleaned up the entire machine really good. On the 2nd one I cleaned as good as I...

yes that's the tip of the 1/32 bit

Nice thought, didn't think about the sled, tight fit and taped but only on two sides not all four.

So here is a picture of one of the lithos the bit broke on, I included a whole shot then one close up with the bit tip still in the material. As far as the answer to the questions. To the best of...

Here's a picture of now 3 broken bits. Only on lithos do I get the issues of clean y rails. No issues at all on wood projects. Have not changed the material supplier and its still the first...

Thanks for all the help on the post, Still not sure what has caused the issue. I have about 400 hours on the carvewright had some issues about 2 weeks ago with the y motor so I changed it solved...

Actually I was using a 1/32 on the first attempt and them a 1/16 bit on the second bit, was carving on best, I do have a dust collector. The y rails are extremely clean

Need some help or suggestions, when carving lithophanes this weekend the machine stopped and a message to clean Y rails came up, I did, let the machine keep going and broke the tip of my first bit. ...