Search:

I have been trying to rework my mpc on the rotary base I have the reverse side of the pocket cut at .5 to allow a nut from the light socket to be flush but in doing so I need to go .625 just so the...

I done the end caps per your m.p.c.. Dan, that was the problem is the end peices were not centered I checked the thicknes of the pipe at the smallest part and was .213 I set my depth at .14 it turn...

So what I am thinking, when you do a "eye ball" check you do the settings the same as a regular lithophane, .180 depth and 450 height.

I'm going to try your end cap and leave the end cap that I've been using off, do I have to change my settings?

I have been experimenting with the light for the rotary litho's I was using a battery light puck with 30 watts I did'nt like have to turn the puck on and then put the pipe on top of it so I went and...

Dan, like you said it depends on the vairation on the thickness of the pipe ...it amazed me on the differece of .001 would make and the brightess of the light.

Results of my hit and miss rotary's... The two of the carves of the same pictures are at different depths .001 difference

I have just ordered the rotary jig I have the software but I'm waiting on the jig.. My question is when diong the rotary it does'nt look the same as when you do it flat... it does'nt have a thickness...