Thank you for your help.
Type: Posts; User: mwunderlin; Keyword(s):
Thank you for your help.
I would like to know how to cut a line using a 60 degree V bit that is tapered from one end to the other. Meaning, the cut line would be deeper on one end and taper to a shallower end.
Hope this...
Steve Nelson,
Thank you for your quick response and it worked, Thank you very much.
Attached is a copy of the file I am working with
85579
I am carving a shape within a carving region and I would like to know how can you have a carving region within a carving region (see picture). Thank you for any and all help.
85574
Steve, my bad I did not check the board size before I posted, thank you for your help on this.
How do I change the name and just so I can learn, what was the process you went through to create...
Sorry it has been so long since I responded but I have been out of town and then had to catch up on carving. All your solutions are shown on larger pieces of wood but my project is on a 4 X 6 or 5 X...
To all, I tried what you said but I failed to let you know the wife wanted the carved names to fit in 4 X 6 frames and all I did every thing was just too small. I am going to see if I can talk her...
How can I carve letters as part of the square like the attached photo. I am wanting to make to Christmas presents with Grandchildren's names.
Thank you for any and all help.
I removed all the constraints and attachments and the same carving error occurred. I used a similar previous project, carved a sample, and it carve correctly. I will use this version for this...
Thank you everyone for looking at the project; would it make a difference if the project is in carrier sled which is what I am using?
I will remove the constraints and attachments and give it a...
Anyone have an idea why this happened? Can you review my project and see if you see the extra line that it carved?
I have built a USAF Technical Sergeant strip and the past two times it carves OK until it gets to the star then it carves an extra line (see Carving Error.jpg) that I can not find in my project, can...
Thanks for the information, I did not go past the part asking for the carving bit so I will give it a try.
Thanks for your help
I am trying carve some words into a board using the 60-degree V bit but I also want to Jog To Position on the keypad but when I select Jog To Position the only bit choices I have is to use the...
I will give it a try this afternoon when I get home.
Do I make it a carve region or just a rectangle around the other pieces?
The patterns I have worked with in the past did not outline each piece when I selected Outline Pattern, it would only give me an outline of the pattern so I can cut the shape out. I was able to...
I have read all your discussion on this and have the experts determined it cannot be made into a pattern? All the patterns are blank for me also.
Version 3.102
I have done that and it still shows the individual parts that I made and i can not outline the pattern.
I have made the attached shape and would like to make it a pattern but I am unable to complete this task, can some one tell me what am I am doing wrong.
Thank you for time
Thank all of you for your help, both files will help me learn more about the tools the machine uses to complete the tasks.
Again, thank you for your help
Attached is the file I am working with
When I am working with the Sweep: Rounded tool and try to get a tight round cone shape (sharp at the bottom) and when I get the shape looking right I get a GUI error and the program closes.
Am I...
The Snell Roundhand Bold font will do.
Thanks for all your help.