That will probably work as long as the machine measures the actual board to be slightly larger in width and length than the virtual board in the Designer and you answer NO to stay under the rollers.
Type: Posts; User: SteveNelson46; Keyword(s):
That will probably work as long as the machine measures the actual board to be slightly larger in width and length than the virtual board in the Designer and you answer NO to stay under the rollers.
If the machine asked you to scale then the width of the actual board is smaller than the board in the designer. You designed the board in the Designer (virtual board) to be 43" by 6" so you will need...
You could also set the grid spacing in the Designer to a distance slightly smaller than the diameter of the bit you intend to use and draw it using the connected lines tool. By using a continuous...
I'm not sure what you mean. Corel Draw is a 3rd party draw program that is analogous to Adobe Illustrator.
I just used Corel Draw. It has a "Contour" function that automatically copies the closed figure to the center by an arbitrary distance. Sort of like automating the offset feature in the Designer....
I changed the carve region to a spiral pocket cut and the finger holes to a drill function. I think you will find that this cuts much faster and will leave the side walls vertical. Uses only the 1/8"...