Hi Ed
I thought I'd add my two cents. I just got my jig and have read the manaul, very interresting. I'm a retired Die Maker from G.M. and have ran a lot of very large metal working machines...
Type: Posts; User: wgrigsby; Keyword(s):
Hi Ed
I thought I'd add my two cents. I just got my jig and have read the manaul, very interresting. I'm a retired Die Maker from G.M. and have ran a lot of very large metal working machines...
Hi
I just ordered my jig and have been doing a lot reading here. I have read alot of talk about using a lathe to make the blank that will be used on it and was wondering if anyone has tryed...
Hi
I've had a Z axis stall before but don't remenber the number that it was. Check the roller bearings, if they are OK make sure the bit is in the chuck right. The problem I had was the bit was...
Hi
I replaced mine with Allen head screws also. I got the from a place near me and I'm giving you the Web site address. They are honest and can supply you with what you want.
...
Tanks Doug
I knew it would be something simple and it makes sense. I've been cutting the ends off my boards after the run is done using my band saw. This would be easer, I'm going to start...
Hi
I've never used "cut board to size" when running a project and was wondering what will it do if I clicked yes instead of no. I have searched help in the manuals and in the forum and never...
Hi
I'm doing something with this months POTM, I thought some of you might be interested in hearing about. I ran # 1 & 2 in both Oak and Ceder. I liked the Ceder the best but still wasn't happy...
How about a section in help on the conform button??
A training vid. would be nice also.
If I want something done right, I find someone else to do it. I'm just being funny, maybe.
Thanks for the replys guys. I was thinking the new board tracking on the "C" might able to slove a problem I've had several times.
When I run a part that has a cut out as the last opration my...
What is the new board tracker on the "C" ? I'm wondering if it could be installed on older machines? I bought one several years and feel the board tracker is one of the problem areas that needed to...
The first time I removed the board sensor it took evevry bit of 1 1/2 hours. I hate the philip head screws used on the machine. When ever I remove one I replace it with a Allen head screw which I...
I'm having a problem with the Designer software. When I click on the icon on the desk top all it does is blink the small window telling the version for less than a second and that's it nothing more...
Greenfield, Indiana Just east of Indianapolis.
Hi
You'll find a web address below for a program called "Coyote Stencil Shop" I've tried a trial version and it looks very good. So I bought it and I'm waiting for delivery. I'm thinking the...
Hi
I found a program "Inkscape" on the net that looks good to me and should be a neat desin tool for your colection of programs ???? It's a FREE download AT:
http://www.inkscape.org/
If you found someone to sharpen your bits wouldn't that make them smaller in Dia. ? How would that work when carving? Since they are carbide bits you could try a very hard stone on the flats not...
I've got a sugeston for the software. When carving a projet with more than one pattern and there is a reason to stop and lets say remove the board. It would be great to be able to restart and have...
Hi
I have the new Z bundle installed. I installed it several months ago and have had problems with it a few times moving at a slight angle in the place it plugs in at the head board. When it...
Hi
Doe's anybody know why LHR is not answering the phones today, Are they still shut down for the weekend because of the hoilday??? 5/26/09
Hi All
I've been following this thread and have made a couple of post to it. I've been wondering if there might be "something else" that could be the cause of the wobble that you are having a...
I'm a retired Die Maker and I worked on sheet metal dies for twenty two years. This taught me a lot about what happens when it is drawn, formed, trimmed or priced. Also dies are a type of machine...
Hi mjlee1148
I don't know if your having problems for the same reason as I had or not. Here is something you can check that was causing my problems. I was having all kinds of error codes and...
Hi Ike
I have to say something about the glass being half full. I thought about that saying for years off & on and I came up with my answer to it. See if you like it or not? Most people are...
Hi All
My machine is out of warranty. I bought it at sears, so it says "Craftsman" on top instead of Carve Wright. I've had it for about 1 1/2 years now, so I'm not worried about voiding the...