I had planned on just cutting out the outside and then cutting the teeth with knife file. But that looks like it wood work!
Printable View
I had planned on just cutting out the outside and then cutting the teeth with knife file. But that looks like it wood work!
Something the forum members may be interested in making on your CW.
http://www.woodworkersjournal.com/re...ags/index.html
here it is as a dxf file.
Here it is in mpc format
Thanks Floyd. I had not looked at the download file. Seems the lines are not connected. Anyone downloading will need to connect them. Or if Floyd or someone else will convert this file, they are connected. I would suggest making the rectangle a pocket cut. (insert area for the card)
Sorry guys for not looking at the downloaded file first and fixing it.
This is in MPC format with all of the vectors joined together. The two halves are meant to be glued together with a laminated business card in the center. I set the board thickness to 1/8" so the finished project would not be too thick. A sled would have to be used.
I guess you could use centerline text, use the solid half only, and carve your name and address on the wood. Many variations.
Steve your MPC download does not work for some reason, at least not for me.