I have mention this before, variable "angle on draft", just like the custom feather.
Printable View
I have mention this before, variable "angle on draft", just like the custom feather.
Laser attachment!!!
I would like to see the STL import software be able to import files greater than 99000 byes. There are a lot of great carves available that exceed the CW import capability. And yea I do reduce the file but there have been a few cases where the results do not do the CW justice.
I also agree with the previous post for measurement.
Guy T, You may have missed it.... The LASER OPTION was available for a short time but could only be used with the QC and the 18 pin FFC as it supplied the 14.2 Giga Watts that it needed... When they went to a 14 pin FFC they deleted that option...
It was rough on the Bit Flag....
Here is a picture of it operating in 2008... It was only available to buy on one day... 4/1/2008.
AL Who
Al Who; I have not run into any memory card limitations. The largest file (20 hour carve) took significant space but left room for several more carve files.
Some of the STL files that are over sized come back as corrupt file.
Only on April Fools DAY.... in 2008... :)
AL Who... Troublemaker...