no LED display

I had a problem this morning I know I messed something up and this go around isn't going to be cheap I just need to start checking what I messed up, I recently put a separate line in for just the carvewright. And was running the harbor freight 2hp dust collector on the shop outlets. Well, I ended up having all the equipment running, 4" ft fan, dust collector two above lights and the carvewright machine on the shop outlets which threw the breaker I reset the breaker and I had no LED on the panel so I'm asking what to check first.

I had a extension cord that was supposed to be plugged in to the the outlet for the carvewright and had in plugged in to the shop outlets drawing way to much power.

First make sure you have power to the outlet after resetting the breaker.

I learned to have the Carvewright with it's own plug and by itself in a wall outlet.

Well Terry, that was a good first thing to check... have no power out of the cavewright outlet just turned everything off in the shop and checked it on the shop outlet I have the LED showing now... check all of the machine out later it's hot out "thare" and thank you, TerryT

I have seen this before at work. For some reason, no power to any of the devices. ;)

Quote:

---

Originally Posted by Proctorw

I have seen this before at work. For some reason, no power to any of the devices. ;)

---

If you can get this to work there will be a huge market for it.http://forum.carvewright.com/images/icons/icon7.png

(((Lost)))

Any additional appliances on outlet is not suggested. It can stall the flow of current and give you an error message.

Alright, Stupidy is a good thing to laugh at...:oops: LMAO !!!

Quote:

---

Originally Posted by Proctorw

I have seen this before at work. For some reason, no power to any of the devices. ;)

---

I have done this and spent a few hours troubleshooting the issue!