AskBud Dust Collector Fitting

Hi.. i just downloaded, carved and assembled the dust collector for my machine. It looks like it will do a good job once I can find a source for the 4" 45 degree fitting. I've spent a bit of time searching but so far no luck.

Anyone know where I can find one?

Thanks!
Pete

Don't know if this will work but here is something I found on amazon http://www.amazon.com/gp/aw/d/B0035Y...634104-1910014

Thanks for the response, chief. I saw several elbows but not one that has a plate and holes for mounting. Most are 2 1/2" for router fence mounting.

pete

Quote:

---

Originally Posted by Northwoods Wood-crafter

Hi.. i just downloaded, carved and assembled the dust collector for my machine. It looks like it will do a good job once I can find a source for the 4" 45 degree fitting. I've spent a bit of time searching but so far no luck.

Anyone know where I can find one?

Thanks!
Pete

---

when I designed this my top loaded Vacuum Head, which may be what you now have, I got my 4" 45 degree fitting at the Wood Craft Store.
AskBud

Thanks! Yes... I do now have your system. I checked Woodcraft but didn't find one. I'll check again.

Pete

Woodcraft only has a 2 1/2" fitting in that config. I may have to adapt the collector for a straight fitting. Shouldn't be too much problem. I may just take the top off the machine altogether. No kids in my household.

pete

Quote:

---

Originally Posted by Northwoods Woodcrafter

Woodcraft only has a 2 1/2" fitting in that config. I may have to adapt the collector for a straight fitting. Shouldn't be too much problem. I may just take the top off the machine altogether. No kids in my household.

pete

---

Here it a link to the item.
It may not be a true 46 degree, but you can see it's on an angle.
AskBud
http://www.woodcraft.com/product/200...l-fitting.aspx

Thanks! I don't know how I missed it.

Pete