pattern depth

Printable View

10-23-2018
Michael Anthony

pattern depth

question for Ask Bud; I am interested in purchasing your angel pattern with the horn, but I am concerned with the depth of the carve. The jewelry box I am making has doors 3/4" thick, but I only want to

recess the pattern a 1/4 into the panel. is that possible, my doors are 3/4X4.5X12 with a half arch on top the 12" is the height I want to insert the angels into an oval 3.5" wide by 10 " tall but only recess into the panel 1/4". would that be possible with this pattern? Thanks in advance for your help!
10-23-2018
want2b

Unfortunately for us Bud is deceased. We're fortunate to be able to use all his tutorials. I think you should be able to control the size and depth of the carve when you create your MPC.
Rick H
10-23-2018
Michael Anthony

OK thanks for the information
10-23-2018
DickB

You can download patterns no charge on a trial basis and adjust in Designer to see if they will work for you.
10-23-2018
fwharris

Every pattern has it's own default depth but all can be adjusted/changed based on your need.
10-23-2018
DickB

Quote:

Originally Posted by fwharris

Every pattern has it's own default depth but all can be adjusted/changed based on your need.

True, but some patterns may lose detail if the depth is set much lower than the depth of the pattern as originally design. That is why I suggested "try before you buy".
10-23-2018
fwharris

Quote:

Originally Posted by DickB

True, but some patterns may lose detail if the depth is set much lower than the depth of the pattern as originally design. That is why I suggested "try before you buy".

And that is also true! :)