2 Attachment(s)
"gui.exe has stopped working"[ERROR] by adding certain profile to a line
Hope I've put this in the right place,
Hi folks, I've had my machine for a few months now and liking it quite well. After designing a few simple "Line Art " jobs with the 60 degree V Bit and adding some "Centerline Text" to it, all seemed to be going along quite well until one day, I edited one of the mpc's, saved it , uploaded it, and carved it, no problem. The next time I tried to open the project in Designer it crashed....leaving me to think at the time it was due to a upgrade from 1.184 to 1.185. After loosing a few more projects since(meaning, the next time I try to open them in Designer it crashes).
This Morning, I tried some troubleshooting with simple, and I mean very simple designs, to try and narrow down the problem and also confirm my suspicions.
Here is my conclusion, which needs to be confirmed by someone else, or rather many others just to make sure it's not something pertaining to my computer system(Vista Home Premium on a Gateway AMD Athlon 64 X2 Dual Core Processor 5000+ 2.6 GHz.)- Simple test Project: I drew a straight line and added a certain(double-ended) profile to that line, so it looks like a pea pod...this one and only attribute in the *.mpc will make it crash(gui.exe stopped)
- If I draw that same line but only use the "single-ended" profile(so it looks like a comet), nothing happens and all is well.
My conclusion is that this certain profile is causing the problem...at least in my case. It's also only when I try to reopen them after saving; meaning if I never closed them, just uploaded them straight to the card, no problem.
I've attached the two simple mpc's for test purposes. CAUTION: SAVE ALL YOUR OPENED WORK BEFORE CONTINUING
Thank you people for all your devotion and hard work,also my thoughts and prayers go out to those found in the wake of Sandy.