Dust collector

If you do not have a dust collector you are missing the right arm of the carvewright system. No this is not an advertisement and I do not work for carvewright. I'm a user in VA. who ventured out on a hunch and bought a dust collector. I was blown away by it's proficiency!! There is little to no cleanup .Do not be afraid of the installation , 10 minutes tops. Get your dremel tool, 12 inch scale and 4 mm socket. draw 3 lines, cut it out. put in the two screws! You're done! It fits perfect! and your machine looks beautiful.

I have not heard anyone regret installing a dust collection insert!!


Make sure not to cut the clear cover too short. Vibration can cause your switch to give you a cut motor stall.

Like I've always said "IT JUST SUCKS!" ... Happy carving and thanks!

If your machine malfunctions on every other project, it might be because you don't have good dust collection.

Quote:

---

Originally Posted by FWMiller

If your machine malfunctions on every other project, it might be because you don't have good dust collection.

---

I think what you are saying is that adding a dust collection insert really improves the reliability of the machine.

Quote:

---

Originally Posted by lynnfrwd

I think what you are saying is that adding a dust collection insert really improves the reliability of the machine.

---

Yes, Correct.

It's like trying to run a drum sander with out a dust collecting system. It ain't gonna happen!