Help getting MPC to STL

Printable View

05-10-2016
WorkedWood

1 Attachment(s)

Help getting MPC to STL

Can anyone help get this MPC file to STL format. I don't have the STL tool and do not have the $$ to spend to get this one file converted.

Thanks in advance for any help.
05-10-2016
fwharris

Only the maker of the pattern would be able to convert it to an STL if using the pattern editor software.
05-10-2016
bergerud

Why do you need it as an stl?
05-11-2016
bjbethke

2 Attachment(s)

Quote:

Originally Posted by WorkedWood

Can anyone help get this MPC file to STL format. I don't have the STL tool and do not have the $$ to spend to get this one file converted.

Thanks in advance for any help.

I have a program called Microcarve; it is used to write the "G" code. I can save the GrayScale image in a STL file, I don't have the CW STL program, so I'm not sure if this will work for you. The STL file is 29MB and the Compressed file is 5.86 MB and too larged to post on the Forum. If you send me a "PM" with your e-mail, I can send it to you.