Printable View
here is what I came up with for My friends Farm , Any Ideas or thoughts as to depth or size for the tractor and farm to come out better after carving{depth, size , bit ect} its a 6.5 hr on best carve so tweaking now may help I know from past carves they tend to break out thanks for any input
I have used that board for many signs and this is what I have found works best for me:
For the barn and tractor use Bit Optimization "Best" and Draft "Small" ( You have small draft on tractor but not on the barn.)
For the lettering since Little Falls NY is smaller I would suggest making the height smaller around 40 or 50.
This is just my preference, nothing wrong with what you already have.
Oh, forgot, add a small draft to the letters.