I keep getting range error and mark is about 30 deg off? Haven't done rotary in some time. Had this trouble before and don't remember how I fixed it.
thanks
Clint
Printable View
I keep getting range error and mark is about 30 deg off? Haven't done rotary in some time. Had this trouble before and don't remember how I fixed it.
thanks
Clint
See if any of this helps you out..
http://support.carvewright.com/troub...g-calibration/
I see that you have made a double post. I will delete your other one.
Almost always, due to the rotary improperly placed in machine. Double-check.
http://support.carvewright.com/troub...g-calibration/
I checked the screws and retightened with a hand driver. Turns freely. Aligned correctly, but each time I reinstall the jig it acts differently - 60 deg past or 160 deg off. Moved from the C machine to the B. Cal rotates 2 1/2 revs then rotates at a creep and won't stop ignoring any key input - power off to stop. Retired and when, cursering to divot, starts rotating slowly and won't /can't stop? Measures a flat board just fins and just finished carving a project. Tried calibration with two different cards.
Really strange? I need to do at least 7 rotary carves for grand (and greatgrand) kid Christmas presents.
Clint...call and talk to Joe.