CarveWright System with Decorative Bit Set for sale - Greenville, SC
Selling my CarveWright system with 10 piece decorative bit set, 3 memory cards and reader, 1/16 and 1/8 cutting bits.
- Please close door message stays on and I don't have time to trouble shoot
- Make an offer (PM with offer)
Give us more detail like is it a B machine and some pic if you can it would helpQuote:
Originally Posted by dmylander
If the cable from the left cover switch is plugged into the circuit card 180 degrees out, you will get a open cover all the time. The white wire in the bunch should be toward the center of the machine.
Also look at board sensor data and roller compressed an uncompressed. IF the board sensor wire is pinched it will take out the 5 volts and give you a open cover all the time.
A quick check and solving the problem could increase the selling price.
Good Luck,
AL
Thank you, I'll take a look at that.
Doug
It's a model 113.217540Attachment 85222Attachment 85223Attachment 85224Attachment 85225
How many hours on it?
you have a pmQuote:
Originally Posted by dmylander