Board settings are correct
Bud,
The board is 3/4" thick on top of a 3/4" sled. If I carve the items individually (text hidden, carve pattern) everything works correctly. It seems to be an issue with the two bits and the calibrating between them.
Quote:
Originally Posted by
AskBud
Your design shows that you are placing a 3/4" board on your sled. My bet is that you really have thin stock, and are making cards or something.
If this is true (stock is thin), then you need to reflect the actual thickness in your design (Board thickness). Designer will prompt you to verify that measurement. Just press "Proceed".
When you run your project, you will be asked if use want to use the "Project" thickness or the combined thickness of the stock & the sled.
AskBud