Working on a sign a went to upload it to the flash card and get the following error.
Following lines are hidden or have zero depth
Everything to me looks good in the pattern
Will it carve with out any issues?
Attachment 82449Attachment 82450
Printable View
Working on a sign a went to upload it to the flash card and get the following error.
Following lines are hidden or have zero depth
Everything to me looks good in the pattern
Will it carve with out any issues?
Attachment 82449Attachment 82450
That is for the T in the star as it has a zero carve depth for your design. You should be good to go...
From your Carving List, click on those two items and delete them.
Quote:
Originally Posted by lynnfrwd
No, do not delete the items. They have zero depth for a reason. It is just a warning. All will be well if you just click ok and upload.
I've found that if you set carve regions to .001" rather than zero the resulting carve will be the same but the warning message is not given.
But then will it carve it as opposed to jumping over it?Quote:
Originally Posted by DickB
I tried to delete it and it removed parts of the drawing.
Going to ignore it and see what happens.
I agree with Bergerud, I get that message all the time. It is just a warning.
Nope, no carving. It still will skip these areas.Quote:
Originally Posted by bergerud
Great. Nice trick to add to the list. Thanks.