View Full Version : Synthetic material for inlays
mgsundgaard
01-09-2009, 07:24 PM
Somewhere in this forum I saw a reference to a synthetic material that is used for inlays. I remember that it was a granular material and you could purchase it in colors, with metallic flakes, swirl patterns and gold or silver looking material. I don't remember the name of the company that produces it.
Can anyone help with the name?
DocWheeler
01-09-2009, 07:26 PM
Here you go (http://forum.carvewright.com/showthread.php?t=9827&highlight=inlace).
MCGEE2SKINNER
01-09-2009, 07:32 PM
Check the woodturners web site they have all colors and all applications.
http://www.woodturnerscatalog.com/cgi-bin/woodturners/dyna/dynaIxFPuy?page_number=1
jim mcgee
swhitney
01-10-2009, 09:44 AM
above post didn't work for me (404 error) but you can get there from their home page, and look under "decorative materials" and then "inlay materials":
http://www.woodturnerscatalog.com/
nice but better pricing from:
http://www.inlacebook.com/
wish they did paypal.........
mgsundgaard
01-10-2009, 12:08 PM
Thanks for the help. This is exactly what I saw before. I am going to give this a try on a round table with a glass top. I want to carve the names of a family on the glass supporting top ridge that is stained very dark and use the InLace to accent the names.
gsrice
01-11-2009, 08:25 PM
I've had a lot of luck using a few drops wood stains mixed with two part epoxy -- klear kote, envirotex lite etc -- this allows the wood grains to show while providing a thick "kid proof" top -- if you want a pearlized look or what ever add mica flakes, or white glass type dusts --
all this stuff is readily avaible at most home stores, or places like woodworkers supply, or my personal favorite : creative-wholesale.com
I've also used epoxy as an alternative to glass or other types of table top finishes. Does a great job adding depth and protecting the carvings.
this is what I used on the two pieces that are show in the customer show case - if you want to see how it looks --
Greg
brdad
01-12-2009, 05:01 AM
The Epoxy is a great idea for a flat surface - I love that coffee table by the way (and don't even watch football) - but you can't really use it like the Inlace, can you? You can't lay it in a groove on an irregular shape and sand it flush?
gsrice
01-12-2009, 11:06 AM
Sanding -- is no problem -- messy but no a big deal -- then you can either re-apply a thin coat or use wax, or poly's to restore the shine -- I sand the heck out of it, and have even used a router on a finished piece to get a smooth edge - --
For a large flat area, to replicate glass just tape the sides with masking tape and have the tape stand proud -- just make sure the surface is perfectly dust free and level --
Something else I've done in a couple of tables is taken medals / coins and dropped them in to the stuff --
Greg
FiddlemakerMills
01-12-2009, 04:19 PM
Here is a design with inlace and CA. The design is .800 x .975
This is a tail piece for a hardanger fiddle. I need more pratice with this method.
Carl
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.